Difference between revisions of "01486"

From Ross-Tech Wiki
 
(6 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
__FORCETOC__
 
__FORCETOC__
== 01486 - System Function Test Activated ==
+
== 01486 - System Function Test activated ==
  
 
==== Possible Symptoms ====
 
==== Possible Symptoms ====
  
* ABS/ESP non-functional<br>
+
* Malfunction Indicator Light (MIL) ON
  
 
==== Possible Causes ====
 
==== Possible Causes ====
  
* System Function Test not performed<br>
+
* When found in Brake Electronics Control Module (J104)
 +
**  Brake Electronics Function Test activated
  
 
==== Possible Solutions ====
 
==== Possible Solutions ====
  
* Perform System Function Test ''(see vehicle specific diagnostic procedures for details)''
+
* When found in Brake Electronics Control Module (J104)  
** [[ESP System Function Test (Bosch)]]
+
** Perform [[ESP System Function Test|Brake Electronics Function Test]]
** [[ESP System Function Test (Conti/Teves)]]
+
 
 +
==== Special Notes ====
 +
 
 +
* Might be stored in Combination with [[B10B3/037043]] in Airbag Control Module (J234), if so perform Function Test first.
 +
* If the [[ESP System Function Test|Brake Electronics Function Test]] procedure will not complete and fault codes are stored in other Powertrain Databus control modules diagnose those issues before replacing ESP components.
 +
* Refer to the Volkswagen Tech Tip [45-09-05] ONLY if the "Electronic Stabilization Program (ESP) function test does not end after several attempts!  https://static.nhtsa.gov/odi/tsbs/2020/MC-10180603-0001.pdf  NHTSA
 +
 
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Latest revision as of 09:30, 15 March 2022

01486 - System Function Test activated

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON

Possible Causes

  • When found in Brake Electronics Control Module (J104)
    • Brake Electronics Function Test activated

Possible Solutions

Special Notes

  • Might be stored in Combination with B10B3/037043 in Airbag Control Module (J234), if so perform Function Test first.
  • If the Brake Electronics Function Test procedure will not complete and fault codes are stored in other Powertrain Databus control modules diagnose those issues before replacing ESP components.
  • Refer to the Volkswagen Tech Tip [45-09-05] ONLY if the "Electronic Stabilization Program (ESP) function test does not end after several attempts! https://static.nhtsa.gov/odi/tsbs/2020/MC-10180603-0001.pdf NHTSA