Difference between revisions of "01638"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
RtWiKiSyS0p (talk | contribs) |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
| − | == | + | == 01638 - Crash Sensor Side Airbag; Rear Drivers Side (G256) == |
| − | === | + | === 01638 - Crash Sensor Side Airbag; Rear Drivers Side (G256): Faulty === |
| + | |||
| + | ==== Possible Symptoms ==== | ||
| + | |||
| + | * Airbag Warning Light ON | ||
| + | |||
| + | ==== Possible Causes ==== | ||
| + | |||
| + | * Wiring/Connectors from/to Crash Sensor Side Airbag; Rear Drivers Side (G256) faulty | ||
| + | * Crash Sensor Side Airbag; Rear Drivers Side (G256) faulty | ||
| + | |||
| + | ==== Possible Solutions ==== | ||
| + | |||
| + | * Check/Replace Wiring/Connectors from/to Crash Sensor Side Airbag; Rear Drivers Side (G256) | ||
| + | * Check/Replace Crash Sensor Side Airbag; Rear Drivers Side (G256) | ||
| + | |||
| + | |||
| + | |||
| + | === 01638 - Crash Sensor Side Airbag; Rear Drivers Side (G256): No or Incorrect Basic Setting / Adaptation === | ||
==== Possible Symptoms ==== | ==== Possible Symptoms ==== | ||
| Line 18: | Line 36: | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
| − | The Crash | + | The Crash Sensors can be checked by using the control module identification and the measuring blocks. |
Address 15: Airbags | Address 15: Airbags | ||
| Line 26: | Line 44: | ||
The 0506 in this example stands for the required Crash Sensor ID, the first 2 digits (05) apply for the front crash sensors, while the second 2 digits (06) apply for the rear crash sensors. The ID of the currently installed Crash Sensors can be determinded by checking Measuring Value Block (MVB) 009. | The 0506 in this example stands for the required Crash Sensor ID, the first 2 digits (05) apply for the front crash sensors, while the second 2 digits (06) apply for the rear crash sensors. The ID of the currently installed Crash Sensors can be determinded by checking Measuring Value Block (MVB) 009. | ||
| + | |||
| + | |||
| + | |||
| + | === 01638 - Crash Sensor Side Airbag; Rear Drivers Side (G256): Implausible Signal === | ||
| + | |||
| + | ==== Possible Symptoms ==== | ||
| + | |||
| + | * Airbag Warning Light ON | ||
| + | |||
| + | ==== Possible Causes ==== | ||
| + | |||
| + | * Wrong/Incompatible Crash Sensor Side Airbag; Rear Drivers Side (G256) installed | ||
| + | * Wiring/Connectors from/to Crash Sensor Side Airbag; Rear Drivers Side (G256) faulty | ||
| + | |||
| + | ==== Possible Solutions ==== | ||
| + | |||
| + | * Check rash Sensor Side Airbag; Rear Drivers Side (G256) Part Number | ||
| + | ** Install correct Crash Sensor Side Airbag; Rear Drivers Side (G256) | ||
| + | * Check/Replace Wiring/Connectors from/to Crash Sensor Side Airbag; Rear Drivers Side (G256) | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 03:39, 12 December 2008
01638 - Crash Sensor Side Airbag; Rear Drivers Side (G256)
01638 - Crash Sensor Side Airbag; Rear Drivers Side (G256): Faulty
Possible Symptoms
- Airbag Warning Light ON
Possible Causes
- Wiring/Connectors from/to Crash Sensor Side Airbag; Rear Drivers Side (G256) faulty
- Crash Sensor Side Airbag; Rear Drivers Side (G256) faulty
Possible Solutions
- Check/Replace Wiring/Connectors from/to Crash Sensor Side Airbag; Rear Drivers Side (G256)
- Check/Replace Crash Sensor Side Airbag; Rear Drivers Side (G256)
01638 - Crash Sensor Side Airbag; Rear Drivers Side (G256): No or Incorrect Basic Setting / Adaptation
Possible Symptoms
- Airbag Warning Light ON
Possible Causes
- Wrong Crash Sensor Side Airbag; Rear Drivers Side (G256) installed
Possible Solutions
- Install correct Crash Sensor Side Airbag; Rear Drivers Side (G256)
Special Notes
The Crash Sensors can be checked by using the control module identification and the measuring blocks.
Address 15: Airbags Controller: 1T0 909 605 Component: 05 AIRBAG VW62 0506 2112 Coding: 0012341
The 0506 in this example stands for the required Crash Sensor ID, the first 2 digits (05) apply for the front crash sensors, while the second 2 digits (06) apply for the rear crash sensors. The ID of the currently installed Crash Sensors can be determinded by checking Measuring Value Block (MVB) 009.
01638 - Crash Sensor Side Airbag; Rear Drivers Side (G256): Implausible Signal
Possible Symptoms
- Airbag Warning Light ON
Possible Causes
- Wrong/Incompatible Crash Sensor Side Airbag; Rear Drivers Side (G256) installed
- Wiring/Connectors from/to Crash Sensor Side Airbag; Rear Drivers Side (G256) faulty
Possible Solutions
- Check rash Sensor Side Airbag; Rear Drivers Side (G256) Part Number
- Install correct Crash Sensor Side Airbag; Rear Drivers Side (G256)
- Check/Replace Wiring/Connectors from/to Crash Sensor Side Airbag; Rear Drivers Side (G256)