Difference between revisions of "01222"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
|||
| (7 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
== 01222 - Crash Sensor Side Airbag; Passenger Side (G180) == | == 01222 - Crash Sensor Side Airbag; Passenger Side (G180) == | ||
| + | |||
| + | === 01222 - Crash Sensor Side Airbag; Passenger Side (G180): Faulty === | ||
| + | === 01222 - Crash Sensor Side Airbag; Passenger Side (G180): Open or Short to Plus === | ||
| + | |||
| + | ==== Possible Symptoms ==== | ||
| + | |||
| + | * Airbag Warning Light ON | ||
| + | |||
| + | ==== Possible Causes ==== | ||
| + | |||
| + | * Wiring/Connections between Airbag Control Module (J234) and Crash Sensor Side Airbag; Passenger Side (G180) faulty | ||
| + | * Crash Sensor Side Airbag; Passenger Side (G180) faulty | ||
| + | * Airbag Control Module (J234) faulty | ||
| + | |||
| + | ==== Possible Solutions ==== | ||
| + | |||
| + | * Check Wiring/Connections between Airbag Control Module (J234) and Crash Sensor Side Airbag; Passenger Side (G180) | ||
| + | * Replace Crash Sensor Side Airbag; Passenger Side (G180) | ||
| + | * Replace Airbag Control Module (J234) | ||
| + | |||
=== 01222 - Crash Sensor Side Airbag; Passenger Side (G180): No or Incorrect Basic Setting / Adaptation === | === 01222 - Crash Sensor Side Airbag; Passenger Side (G180): No or Incorrect Basic Setting / Adaptation === | ||
| Line 11: | Line 31: | ||
* Wrong Crash Sensor Side Airbag; Passenger Side (G180) installed | * Wrong Crash Sensor Side Airbag; Passenger Side (G180) installed | ||
| + | * Newly Installed Airbag Module is Not Compatible With Crash Sensor(s) | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
* Install correct Crash Sensor Side Airbag; Passenger Side (G180) | * Install correct Crash Sensor Side Airbag; Passenger Side (G180) | ||
| + | * Install Airbag Module that is Compatible With Crash Sensor(s) | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
| − | The Crash | + | * The US Market [[VW Golf/Jetta/Bora (1J/9M) | (9M) Jetta]] has a common Airbag Control Module replacement conflict with the existing Crash Sensors. This is mentioned in TSB # 69-08-04 (TPI-2011170) with the following example: |
| + | ** When control module 1C0-909-605-F-004 (coded to 12340) is replaced with 1C0-909-605-F-01E the original Crash Sensors are not compatible. The new module will refuse coding if DTCs 01221, 01222, 01738, or 1739 are stored. This is also noted here: [http://www.ross-tech.com/vag-com/cars/airbag-coding.html Airbag Coding] | ||
| + | |||
| + | The Crash Sensors can be checked by using the control module identification and the measuring blocks. | ||
Address 15: Airbags | Address 15: Airbags | ||
| Line 25: | Line 50: | ||
Coding: 0012341 | Coding: 0012341 | ||
| − | The 0506 in this example stands for the required Crash Sensor ID, the first 2 digits (05) apply for the front crash sensors, while the second 2 digits (06) apply for the rear crash sensors. The ID of the currently installed Crash Sensors can be | + | The 0506 in this example stands for the required Crash Sensor ID, the first 2 digits (05) apply for the front crash sensors, while the second 2 digits (06) apply for the rear crash sensors. The ID of the currently installed Crash Sensors can be determined by checking Measuring Value Block (MVB) 009. |
| + | |||
| + | === 01222 - Crash Sensor Side Airbag; Passenger Side (G180): Implausible Signal === | ||
| + | |||
| + | ==== Possible Symptoms ==== | ||
| + | |||
| + | * Airbag Warning Light ON | ||
| + | |||
| + | ==== Possible Causes ==== | ||
| + | |||
| + | * Wrong/Incompatible Crash Sensor Side Airbag; Passenger Side (G180) installed | ||
| + | * Wiring/Connections between Airbag Control Module (J234) and Crash Sensor Side Airbag; Passenger Side (G180) faulty | ||
| + | |||
| + | ==== Possible Solutions ==== | ||
| + | |||
| + | * Check Crash Sensor Side Airbag; Passenger Side (G180) Part Number | ||
| + | ** Install correct Crash Sensor Side Airbag; Passenger Side (G180) | ||
| + | * Check Wiring/Connections between Airbag Control Module (J234) and Crash Sensor Side Airbag; Passenger Side (G180) | ||
| + | |||
| + | ==== Special Notes ==== | ||
| + | |||
| + | * When found on 2019 - 2022 Atlas, Atlas Cross Sport, Golf, Golf Wagon, Jetta, Tiguan and Taos, please see TT 97-21-02 for possible wiring harness issue: | ||
| + | ** https://static.nhtsa.gov/odi/tsbs/2022/MC-10208280-0001.pdf NHTSA | ||
| + | *** May also find DTCs U0199, U0200, B1017 or B1036. | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 15:33, 12 May 2022
01222 - Crash Sensor Side Airbag; Passenger Side (G180)
01222 - Crash Sensor Side Airbag; Passenger Side (G180): Faulty
01222 - Crash Sensor Side Airbag; Passenger Side (G180): Open or Short to Plus
Possible Symptoms
- Airbag Warning Light ON
Possible Causes
- Wiring/Connections between Airbag Control Module (J234) and Crash Sensor Side Airbag; Passenger Side (G180) faulty
- Crash Sensor Side Airbag; Passenger Side (G180) faulty
- Airbag Control Module (J234) faulty
Possible Solutions
- Check Wiring/Connections between Airbag Control Module (J234) and Crash Sensor Side Airbag; Passenger Side (G180)
- Replace Crash Sensor Side Airbag; Passenger Side (G180)
- Replace Airbag Control Module (J234)
01222 - Crash Sensor Side Airbag; Passenger Side (G180): No or Incorrect Basic Setting / Adaptation
Possible Symptoms
- Airbag Warning Light ON
Possible Causes
- Wrong Crash Sensor Side Airbag; Passenger Side (G180) installed
- Newly Installed Airbag Module is Not Compatible With Crash Sensor(s)
Possible Solutions
- Install correct Crash Sensor Side Airbag; Passenger Side (G180)
- Install Airbag Module that is Compatible With Crash Sensor(s)
Special Notes
- The US Market (9M) Jetta has a common Airbag Control Module replacement conflict with the existing Crash Sensors. This is mentioned in TSB # 69-08-04 (TPI-2011170) with the following example:
- When control module 1C0-909-605-F-004 (coded to 12340) is replaced with 1C0-909-605-F-01E the original Crash Sensors are not compatible. The new module will refuse coding if DTCs 01221, 01222, 01738, or 1739 are stored. This is also noted here: Airbag Coding
The Crash Sensors can be checked by using the control module identification and the measuring blocks.
Address 15: Airbags Controller: 1T0 909 605 Component: 05 AIRBAG VW62 0506 2112 Coding: 0012341
The 0506 in this example stands for the required Crash Sensor ID, the first 2 digits (05) apply for the front crash sensors, while the second 2 digits (06) apply for the rear crash sensors. The ID of the currently installed Crash Sensors can be determined by checking Measuring Value Block (MVB) 009.
01222 - Crash Sensor Side Airbag; Passenger Side (G180): Implausible Signal
Possible Symptoms
- Airbag Warning Light ON
Possible Causes
- Wrong/Incompatible Crash Sensor Side Airbag; Passenger Side (G180) installed
- Wiring/Connections between Airbag Control Module (J234) and Crash Sensor Side Airbag; Passenger Side (G180) faulty
Possible Solutions
- Check Crash Sensor Side Airbag; Passenger Side (G180) Part Number
- Install correct Crash Sensor Side Airbag; Passenger Side (G180)
- Check Wiring/Connections between Airbag Control Module (J234) and Crash Sensor Side Airbag; Passenger Side (G180)
Special Notes
- When found on 2019 - 2022 Atlas, Atlas Cross Sport, Golf, Golf Wagon, Jetta, Tiguan and Taos, please see TT 97-21-02 for possible wiring harness issue:
- https://static.nhtsa.gov/odi/tsbs/2022/MC-10208280-0001.pdf NHTSA
- May also find DTCs U0199, U0200, B1017 or B1036.
- https://static.nhtsa.gov/odi/tsbs/2022/MC-10208280-0001.pdf NHTSA