Difference between revisions of "VW Radio Systems Generation 6"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
RtWiKiSyS0p (talk | contribs) m |
||
| (One intermediate revision by the same user not shown) | |||
| Line 33: | Line 33: | ||
* 0 = Playback disabled | * 0 = Playback disabled | ||
* 1 = Playback enabled | * 1 = Playback enabled | ||
| − | Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored. | + | ''Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored.'' |
=== Channel 011: Remote Control (Source) === | === Channel 011: Remote Control (Source) === | ||
* 0 = FM | * 0 = FM | ||
* 1 = AM | * 1 = AM | ||
| − | Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored. | + | ''Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored.'' |
=== Channel 012: Remote Control (Frequency FM) === | === Channel 012: Remote Control (Frequency FM) === | ||
The Frequency Adjustment is being carried out incrementally starting with 0 = 88.3 MHz.<br> | The Frequency Adjustment is being carried out incrementally starting with 0 = 88.3 MHz.<br> | ||
| − | Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored. | + | ''Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored.'' |
| − | === Channel 013: Remote Control (Frequency AM) | + | === Channel 013: Remote Control (Frequency AM) === |
The Frequency Adjustment is being carried out incrementally starting with 0 = 540 kHz.<br> | The Frequency Adjustment is being carried out incrementally starting with 0 = 540 kHz.<br> | ||
| − | Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored. | + | ''Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored.'' |
=== Channel 014: Remote Control (Volume) === | === Channel 014: Remote Control (Volume) === | ||
* Range: 0...100 | * Range: 0...100 | ||
* Standard: 40 | * Standard: 40 | ||
| − | Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored. | + | ''Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored.'' |
=== Channel 015: Remote Control (Balance) === | === Channel 015: Remote Control (Balance) === | ||
| − | Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored. | + | ''Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored.'' |
=== Channel 016: Remote Control (Fader) === | === Channel 016: Remote Control (Fader) === | ||
| − | Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored. | + | ''Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored.'' |
Latest revision as of 11:14, 27 March 2008
Coding
- 00?xxxx: Treble Speaker Monitoring
- 1 = Front and Rear Monitoring inactive
- 2 = Front Monitoring active / Rear Monitoring inactive
- 3 = Front Monitoring inactive / Rear Monitoring active
- 4 = Front and Rear Monitoring active
- 00x?xxx: Radio Configuration I
- +2 = CAN-Telephone Control
- 00xx?xx: Speaker Channels
- 0 = No passive Speakers (Sound System)
- 2 = 2 passive Speakers Front and 0 passive Speakers Rear
- 4 = 4 passive Speakers
- 00xxx?x: Sound System Correction
- 0 = No Sound System (No Correction)
- 1 = Sound System with Cloth Interior (with Open Circuit Recognition)
- 2 = Sound System with Leather Interior (with Open Circuit Recognition)
- 3 = Sound System with Cloth Interior (without Open Circuit Recognition)
- 00xxxx?: Radio Configuration II
- +1 = Active/Remote Supplied Antenna
- +2 = CD-Changer/iPod-Connection
- +4 = CAN-Secondary Display (Board Computer/large Display)
Adaptation
Channel 001: Reception Optimization
This channel allows optimization of the reception behavior for areas with strong FM interference.
- 0 = Normal reception
- 1 = Optimized reception
Channel 010: Remote Control
- 0 = Playback disabled
- 1 = Playback enabled
Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored.
Channel 011: Remote Control (Source)
- 0 = FM
- 1 = AM
Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored.
Channel 012: Remote Control (Frequency FM)
The Frequency Adjustment is being carried out incrementally starting with 0 = 88.3 MHz.
Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored.
Channel 013: Remote Control (Frequency AM)
The Frequency Adjustment is being carried out incrementally starting with 0 = 540 kHz.
Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored.
Channel 014: Remote Control (Volume)
- Range: 0...100
- Standard: 40
Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored.
Channel 015: Remote Control (Balance)
Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored.
Channel 016: Remote Control (Fader)
Note: After closing the Diagnostic Session/Communication the Standard Value 0 is automatically being restored.