Difference between revisions of "16816/P0432"
From Ross-Tech Wiki
| (7 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
==== Possible Symptoms ==== | ==== Possible Symptoms ==== | ||
| − | * MIL | + | * Malfunction Indicator Light (MIL) ON |
==== Possible Causes ==== | ==== Possible Causes ==== | ||
| − | * Failed | + | * Failed Ceramic Monolith in Catalyst |
| − | * | + | * Oxygen Sensor(s) defective |
| − | * Leak in | + | * Leak in Exhaust System |
| − | * Firmware issue with ECM | + | * Firmware issue with Engine Control Module (ECM) |
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
| − | * Inspect | + | * Inspect Catalyst for internal rattle |
| − | * Perform | + | * Check Oxygen Sensor(s) |
| − | * | + | * Check Oxygen Sensor(s) Control |
| − | * | + | * Perform Oxygen Sensor(s) Aging Check |
| − | * Check ECM | + | * Set Readiness |
| + | * Check for Leaks in Exhaust | ||
| + | * Check ECM for firmware updates | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
Latest revision as of 14:19, 9 February 2011
16816/P0432 - Main Catalyst: Bank 2: Efficiency Below Threshold
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
Possible Causes
- Failed Ceramic Monolith in Catalyst
- Oxygen Sensor(s) defective
- Leak in Exhaust System
- Firmware issue with Engine Control Module (ECM)
Possible Solutions
- Inspect Catalyst for internal rattle
- Check Oxygen Sensor(s)
- Check Oxygen Sensor(s) Control
- Perform Oxygen Sensor(s) Aging Check
- Set Readiness
- Check for Leaks in Exhaust
- Check ECM for firmware updates
Special Notes
- For Audi engine codes ART or AKB, please see TSB 26-04-01
- For Audi engine code ATQ, please see TSB 26-08-07
- For Volkswagen engines, please see TSB 01-07-07
- As per TSB 01-07-54, do not replace the ECM for this DTC. Please see TSB for complete details.