Difference between revisions of "17090/P0706/001798"
From Ross-Tech Wiki
(Created page with "== 17090/P0706/001798 - Transmission Range Sensor (F125): Implausible Signal== ==== Possible Symptoms ==== * No Reverse Lights * Engine will not start (In 01J-CVT if Hall s...") |
RtWiKiSyS0p (talk | contribs) |
||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
== 17090/P0706/001798 - Transmission Range Sensor (F125): Implausible Signal== | == 17090/P0706/001798 - Transmission Range Sensor (F125): Implausible Signal== | ||
| − | |||
==== Possible Symptoms ==== | ==== Possible Symptoms ==== | ||
* No Reverse Lights | * No Reverse Lights | ||
| − | * Engine will not start | + | * Engine will not start |
| − | * Incorrect | + | * Incorrect Gear Selection |
| − | * PRNDL | + | * Gear Indicator Display (PRNDL) may be flashing |
==== Possible Causes ==== | ==== Possible Causes ==== | ||
| − | * Gear | + | * Gear Selector Cable incorrectly adjusted |
| − | * | + | * Transmission Range Sensor (F125) faulty |
| − | * Wiring or | + | * Wiring and/or Connector(s) from/to Transmission Range Sensor (F125) faulty |
| − | |||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
| − | * Adjust | + | * Adjust Gear Selector Cable |
| − | ** Check | + | ** Check Measuring Value Blocks (MVB) |
| − | * Replace | + | * Check/Replace Transmission Range Sensor (F125) |
| − | * Repair/ | + | * Check/Repair/Replace Wiring and/or Connector(s) from/to Transmission Range Sensor (F125) |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | ==== Special Notes ==== | |
| + | * When found in [[6-Speed Automatic Transmission (01J/Multitronic)]], the Transmission Range Sensor (F125) is part of the Transmission Control Module (J217)! | ||
| + | ** Check Measuring Value Block (MVB) 002 for Plausibility | ||
| + | ** Check all four Hall Sensor(s) / Magnets | ||
| + | ** Check Selector Shaft Magnet(s) for Damage | ||
| + | ** Check/Replace Transmission Control Module (J217) | ||
__FORCETOC__ | __FORCETOC__ | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 12:01, 5 May 2014
17090/P0706/001798 - Transmission Range Sensor (F125): Implausible Signal
Possible Symptoms
- No Reverse Lights
- Engine will not start
- Incorrect Gear Selection
- Gear Indicator Display (PRNDL) may be flashing
Possible Causes
- Gear Selector Cable incorrectly adjusted
- Transmission Range Sensor (F125) faulty
- Wiring and/or Connector(s) from/to Transmission Range Sensor (F125) faulty
Possible Solutions
- Adjust Gear Selector Cable
- Check Measuring Value Blocks (MVB)
- Check/Replace Transmission Range Sensor (F125)
- Check/Repair/Replace Wiring and/or Connector(s) from/to Transmission Range Sensor (F125)
Special Notes
- When found in 6-Speed Automatic Transmission (01J/Multitronic), the Transmission Range Sensor (F125) is part of the Transmission Control Module (J217)!
- Check Measuring Value Block (MVB) 002 for Plausibility
- Check all four Hall Sensor(s) / Magnets
- Check Selector Shaft Magnet(s) for Damage
- Check/Replace Transmission Control Module (J217)