Difference between revisions of "Bentley Continental (3W) Automatic Roof"
From Ross-Tech Wiki
(Created page with "__FORCETOC__ == Coding == == Adaptation ==") |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
| − | + | Additional information can be found in the [[Official Factory Repair Information]]. | |
| + | |||
| + | |||
== Adaptation == | == Adaptation == | ||
| + | |||
| + | '''<u>Prerequisites: End Stops</u>''' | ||
| + | * Vehicle system voltage above 12.0v (Engine running) | ||
| + | * All doors and lids shut | ||
| + | * No faults in the [26-Automatic Roof] controller | ||
| + | * Convertible Top in good condition, no damage | ||
| + | * Convertible Top Closed and locked | ||
| + | |||
| + | |||
| + | === Channel 00: Delete End Stops === | ||
| + | |||
| + | To reset the learned End Stops, save a new value of 0 | ||
| + | * Then follow with the Relearn End Stops. | ||
| + | |||
| + | |||
| + | === Channel 01: Relearn End Stops === | ||
| + | |||
| + | To start the relearn the End Stops, save a new value of 1 | ||
| + | * Open the Convertible Top to 'Relearn' the End Stops. | ||
| + | * Check for and clear any fault codes. | ||
| + | * Check for proper Convertible Top Operation | ||
Latest revision as of 12:04, 12 April 2018
Additional information can be found in the Official Factory Repair Information.
Adaptation
Prerequisites: End Stops
- Vehicle system voltage above 12.0v (Engine running)
- All doors and lids shut
- No faults in the [26-Automatic Roof] controller
- Convertible Top in good condition, no damage
- Convertible Top Closed and locked
Channel 00: Delete End Stops
To reset the learned End Stops, save a new value of 0
- Then follow with the Relearn End Stops.
Channel 01: Relearn End Stops
To start the relearn the End Stops, save a new value of 1
- Open the Convertible Top to 'Relearn' the End Stops.
- Check for and clear any fault codes.
- Check for proper Convertible Top Operation