01208: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
01208 - Data Records in Control Unit Altered
- 1.1.1 Possible Symptoms
- 1.2.1 Possible Causes
- 1.3.1 Possible Solutions
- 1.4.1 Special Notes
Created page with "__FORCETOC__ == 01208 - Data Records in Control Unit Altered == === Possible Symptoms === * MIL (Malfunction Indicator Lamp) ON * Transmission may not engage * Vehicle may enter limp mode * Basic Settings may fail === Possible Causes === * Engine and Transmission software versions are incompatible * Incorrect or non-matching DSG Mechatronics unit installed * Control Module internal data records altered or corrupted === Possible Solutions === * Verify correct DSG..." |
No edit summary |
||
| Line 9: | Line 9: | ||
* Vehicle may enter limp mode | * Vehicle may enter limp mode | ||
* Basic Settings may fail | * Basic Settings may fail | ||
=== Possible Causes === | === Possible Causes === | ||
| Line 16: | Line 15: | ||
* Incorrect or non-matching DSG Mechatronics unit installed | * Incorrect or non-matching DSG Mechatronics unit installed | ||
* Control Module internal data records altered or corrupted | * Control Module internal data records altered or corrupted | ||
=== Possible Solutions === | === Possible Solutions === | ||
| Line 26: | Line 24: | ||
* Perform Coding and Basic Settings | * Perform Coding and Basic Settings | ||
* Verify Engine and Transmission software levels are up to date (with ODIS if needed) | * Verify Engine and Transmission software levels are up to date (with ODIS if needed) | ||
=== Special Notes === | === Special Notes === | ||
* This fault indicates that the Engine Control Module (ECM) and the Transmission Control Module (TCM/DSG Mechatronics) contain mismatched or incompatible software versions. The TCM stores configuration data that must correspond to the engine's controller software variant. When these do not align, such as after replacing the Mechatronics unit with one from another vehicle or installing an incorrect software version/part number, the vehicle detects the mismatch and sets the fault. | * This fault indicates that the Engine Control Module (ECM) and the Transmission Control Module (TCM/DSG Mechatronics) contain mismatched or incompatible software versions. The TCM stores configuration data that must correspond to the engine's controller software variant. When these do not align, such as after replacing the Mechatronics unit with one from another vehicle or installing an incorrect software version/part number, the vehicle detects the mismatch and sets the fault. | ||
Latest revision as of 16:16, 15 October 2025
01208 - Data Records in Control Unit Altered
Possible Symptoms
- MIL (Malfunction Indicator Lamp) ON
- Transmission may not engage
- Vehicle may enter limp mode
- Basic Settings may fail
Possible Causes
- Engine and Transmission software versions are incompatible
- Incorrect or non-matching DSG Mechatronics unit installed
- Control Module internal data records altered or corrupted
Possible Solutions
- Verify correct DSG Mechatronics part number for the specific vehicle
- Check the VAG number displayed in the Open Controller screen in VCDS
- Confirm part number and software version with the Manufacture's parts department
- Replace with the correct, compatible Mechatronics unit if mismatched
- Perform Coding and Basic Settings
- Verify Engine and Transmission software levels are up to date (with ODIS if needed)
Special Notes
- This fault indicates that the Engine Control Module (ECM) and the Transmission Control Module (TCM/DSG Mechatronics) contain mismatched or incompatible software versions. The TCM stores configuration data that must correspond to the engine's controller software variant. When these do not align, such as after replacing the Mechatronics unit with one from another vehicle or installing an incorrect software version/part number, the vehicle detects the mismatch and sets the fault.
No categories.