Difference between revisions of "VW Passat (3C) Parking Brake"

Revision as of 11:14, 31 March 2006

Coding

0000010 = Parking Brake without Auto-Hold (North America)
0000011 = Parking Brake without Auto-Hold (Rest of World / PR-UH1)
0000012 = Parking Brake with Auto-Hold (Rest of World / PR-UH2)
0000013 = Parking Brake with Auto-Hold (North America)

Adaptation

Basic Setting

Open Rear Parking Brake

[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 007
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now opening.
[Done, Go Back]
[Close Controller, Go Back - 06]

Close Rear Parking Brake

[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 006
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now closing.
[Done, Go Back]
[Close Controller, Go Back - 06]

Function Test

[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 010
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now opening and closing 3 times.
[Done, Go Back]
[Close Controller, Go Back - 06]

Longitudinal Acceleration Sensor (G251)

[Select]
[03 - Brake Electronics]
[Measuring Blocks - 08]
Group 004
[Go!]
Check field 4, the value has to be between -1.5 and +1.5 m/s².
[Done, Go Back]
[Close Controller, Go Back - 06]

[53 - Parking Brake]
[Basic Settings - 04]
Group 020
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The status of the Longitudinal Acceleration Sensor (G251) is now beeing displayed.
[Done, Go Back]
To make sure the basic setting was succesful, check the sensor again.
[Close Controller, Go Back - 06]

[03 - Brake Electronics]
[Measuring Blocks - 08]
Group 004
[Go!]
Check field 4, the value has to be between -2.5 and +2.5 m/s².
[Done, Go Back]
[Close Controller, Go Back - 06]

@@ Line 12: / Line 12: @@
 == Basic Setting ==
-=== Basic Setting: Open Rear Parking Brake ===
+=== Open Rear Parking Brake ===
 '''[Select]'''<br>
@@ Line 22: / Line 22: @@
 '''[ON/OFF/Next]'''<br>
 The brake pads are now opening.<br>
-'''[Done, Go Back]'''<br><br>
+'''[Done, Go Back]'''<br>
+'''[Close Controller, Go Back - 06]'''<br><br>
-=== Basic Setting: Close Rear Parking Brake ===
+----
+=== Close Rear Parking Brake ===
 '''[Select]'''<br>
@@ Line 34: / Line 36: @@
 '''[ON/OFF/Next]'''<br>
 The brake pads are now closing.<br>
-'''[Done, Go Back]'''<br><br>
+'''[Done, Go Back]'''<br>
+'''[Close Controller, Go Back - 06]'''<br><br>
-=== Basic Setting: Function Test ===
+----
+=== Function Test ===
 '''[Select]'''<br>
@@ Line 47: / Line 51: @@
 The brake pads are now opening and closing 3 times.<br>
 '''[Done, Go Back]'''<br>
+'''[Close Controller, Go Back - 06]'''<br><br>
+----
+=== Longitudinal Acceleration Sensor (G251) ===
+'''[Select]'''<br>
+'''[03 - Brake Electronics]'''<br>
+'''[Measuring Blocks - 08]'''<br>
+Group 004<br>
+'''[Go!]'''<br>
+Check field 4, the value has to be between -1.5 and +1.5 m/s².<br>
+'''[Done, Go Back]'''<br>
+'''[Close Controller, Go Back - 06]'''<br><br>
+'''[53 - Parking Brake]'''<br>
+'''[Basic Settings - 04]'''<br>
+Group 020<br>
+'''[Go!]'''<br>
+Activate the Basic Setting.<br>
+'''[ON/OFF/Next]'''<br>
+The status of the Longitudinal Acceleration Sensor (G251) is now beeing displayed.<br>
+'''[Done, Go Back]'''<br>
+To make sure the basic setting was succesful, check the sensor again.<br>
+'''[Close Controller, Go Back - 06]'''<br><br>
+'''[03 - Brake Electronics]'''<br>
+'''[Measuring Blocks - 08]'''<br>
+Group 004<br>
+'''[Go!]'''<br>
+Check field 4, the value has to be between -2.5 and +2.5 m/s².<br>
+'''[Done, Go Back]'''<br>
+'''[Close Controller, Go Back - 06]'''<br>

Difference between revisions of "VW Passat (3C) Parking Brake"

Revision as of 11:14, 31 March 2006

Contents