VW Passat (3C) Brake Electronics: Difference between revisions

Revision as of 15:30, 31 March 2006

Basic Setting

Sensor for Steering Angle (G85)

Lateral Acceleration Sensor (G200)

[Select]
[03 - Brake Electronics]
[Measuring Blocks - 08]
Group 004
[Go!]
Check field 2, the value has to be between -1.5 and +1.5 m/s².
[Done, Go Back]
[Security Access - 16]
Enter 40168, to enable the basic setting.
[Do it!]
[Basic Settings - 04]
Group 063
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
After a successful basic setting, field 3 should say "OK".
[Done, Go Back]
To make sure the basic setting was succesful, check the sensor again.
[Measuring Blocks - 08]
Group 004
[Go!]
Check field 2, the value has to be between -1.5 and +1.5 m/s².
[Done, Go Back]

Brake Pressure Sensor 1 (G201)

[Select]
[03 - Brake Electronics]
[Measuring Blocks - 08]
Group 005
[Go!]
Check field 1, the value has to be between -8.0 and +8.0 bar.
[Done, Go Back]
[Security Access - 16]
Enter 40168, to enable the basic setting.
[Do it!]
[Basic Settings - 04]
Group 066
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
After a successful basic setting, field 3 should say "OK".
[Done, Go Back]
To make sure the basic setting was succesful, check the sensor again.
[Measuring Blocks - 08]
Group 005
[Go!]
Check field 1, the value has to be between -3.8 and +3.8 bar.
[Done, Go Back]

Yaw Rate Sensor (G202)

[Select]
[03 - Brake Electronics]
[Measuring Blocks - 08]
Group 004
[Go!]
Check field 3, the value has to be between -1.5 and +1.5 m/s².
[Done, Go Back]
[Security Access - 16]
Enter 40168, to enable the basic setting.
[Do it!]
[Basic Settings - 04]
Group 068
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
After a successful basic setting, field 3 should say "OK".
[Done, Go Back]
To make sure the basic setting was succesful, check the sensor again.
[Measuring Blocks - 08]
Group 004
[Go!]
Check field 3, the value has to be between -1.5 and +1.5 m/s².
[Done, Go Back]

Longitudinal Acceleration Sensor (G251)

[Select]
[03 - Brake Electronics]
[Measuring Blocks - 08]
Group 004
[Go!]
Check field 4, the value has to be between -1.5 and +1.5 m/s².
[Done, Go Back]
[Security Access - 16]
Enter 40168, to enable the basic setting.
[Do it!]
[Basic Settings - 04]
Group 020
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The status of the Longitudinal Acceleration Sensor (G251) is now beeing displayed.
[Done, Go Back]
To make sure the basic setting was succesful, check the sensor again.
[Measuring Blocks - 08]
Group 004
[Go!]
Check field 4, the value has to be between -2.5 and +2.5 m/s².
[Done, Go Back]

@@ Line 1: / Line 1: @@
+__FORCETOC__
 == Basic Setting ==
-=== Basic Setting: Lateral Acceleration Sensor (G2200) ===
+=== Sensor for Steering Angle (G85) ===
+----
+=== Lateral Acceleration Sensor (G200) ===
 '''[Select]'''<br>
@@ Line 19: / Line 24: @@
 '''[ON/OFF/Next]'''<br>
 After a successful basic setting, field 3 should say "OK".<br>
+'''[Done, Go Back]'''<br>
+To make sure the basic setting was succesful, check the sensor again.<br>
+'''[Measuring Blocks - 08]'''<br>
+Group 004<br>
+'''[Go!]'''<br>
+Check field 2, the value has to be between -1.5 and +1.5 m/s².<br>
+'''[Done, Go Back]'''<br><br>
+----
+=== Brake Pressure Sensor 1 (G201) ===
+'''[Select]'''<br>
+'''[03 - Brake Electronics]'''<br>
+'''[Measuring Blocks - 08]'''<br>
+Group 005<br>
+'''[Go!]'''<br>
+Check field 1, the value has to be between -8.0 and +8.0 bar.<br>
+'''[Done, Go Back]'''<br>
+'''[Security Access - 16]'''<br>
+Enter 40168, to enable the basic setting.<br>
+'''[Do it!]'''<br>
+'''[Basic Settings - 04]'''<br>
+Group 066<br>
+'''[Go!]'''<br>
+Activate the Basic Setting.<br>
+'''[ON/OFF/Next]'''<br>
+After a successful basic setting, field 3 should say "OK".<br>
+'''[Done, Go Back]'''<br>
+To make sure the basic setting was succesful, check the sensor again.<br>
+'''[Measuring Blocks - 08]'''<br>
+Group 005<br>
+'''[Go!]'''<br>
+Check field 1, the value has to be between -3.8 and +3.8 bar.<br>
+'''[Done, Go Back]'''<br><br>
+----
+=== Yaw Rate Sensor (G202) ===
+'''[Select]'''<br>
+'''[03 - Brake Electronics]'''<br>
+'''[Measuring Blocks - 08]'''<br>
+Group 004<br>
+'''[Go!]'''<br>
+Check field 3, the value has to be between -1.5 and +1.5 m/s².<br>
+'''[Done, Go Back]'''<br>
+'''[Security Access - 16]'''<br>
+Enter 40168, to enable the basic setting.<br>
+'''[Do it!]'''<br>
+'''[Basic Settings - 04]'''<br>
+Group 068<br>
+'''[Go!]'''<br>
+Activate the Basic Setting.<br>
+'''[ON/OFF/Next]'''<br>
+After a successful basic setting, field 3 should say "OK".<br>
+'''[Done, Go Back]'''<br>
+To make sure the basic setting was succesful, check the sensor again.<br>
+'''[Measuring Blocks - 08]'''<br>
+Group 004<br>
+'''[Go!]'''<br>
+Check field 3, the value has to be between -1.5 and +1.5 m/s².<br>
 '''[Done, Go Back]'''<br><br>
-To make sure the basic setting was succesful, check the sensor again.<br><br>
+----
+=== Longitudinal Acceleration Sensor (G251) ===
+'''[Select]'''<br>
+'''[03 - Brake Electronics]'''<br>
 '''[Measuring Blocks - 08]'''<br>
 Group 004<br>
 '''[Go!]'''<br>
-Check field 2, the value has to be between -1.5 and +1.5 m/s².<br>
+Check field 4, the value has to be between -1.5 and +1.5 m/s².<br>
+'''[Done, Go Back]'''<br>
+'''[Security Access - 16]'''<br>
+Enter 40168, to enable the basic setting.<br>
+'''[Do it!]'''<br>
+'''[Basic Settings - 04]'''<br>
+Group 020<br>
+'''[Go!]'''<br>
+Activate the Basic Setting.<br>
+'''[ON/OFF/Next]'''<br>
+The status of the Longitudinal Acceleration Sensor (G251) is now beeing displayed.<br>
 '''[Done, Go Back]'''<br>
+To make sure the basic setting was succesful, check the sensor again.<br>
+'''[Measuring Blocks - 08]'''<br>
+Group 004<br>
+'''[Go!]'''<br>
+Check field 4, the value has to be between -2.5 and +2.5 m/s².<br>
+'''[Done, Go Back]'''<br><br>

VW Passat (3C) Brake Electronics: Difference between revisions

Namespaces

Views

More

Table Of Contents