Difference between revisions of "16497/P0113/000275"
From Ross-Tech Wiki
Gerrit Speek (talk | contribs) |
RtWiKiSyS0p (talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | + | == 16497/P0113/000275 - Intake Air Temp. Sensor (G42): Signal too High == | |
| − | == 16497/P0113 - Intake Air | ||
==== Possible Symptoms ==== | ==== Possible Symptoms ==== | ||
| − | * | + | * Malfunction Indicator Light (MIL) ON |
==== Possible Causes ==== | ==== Possible Causes ==== | ||
| − | * | + | * Fuse(s) faulty |
| − | + | * Wiring and/or Connector(s) from/to Intake Air Temp. Sensor (G42) faulty | |
| − | * Sensor | + | * Intake Air Temp. Sensor (G42) faulty |
| − | |||
| − | * | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
| − | * Check | + | * Check Fuse(s) |
| − | * Check / | + | * Check Wiring and/or Connector(s) from/to Intake Air Temp. Sensor (G42) |
| − | * Check / Replace | + | * Check/Replace Intake Air Temp. Sensor (G42) |
| + | __FORCETOC__ | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 07:08, 1 June 2010
16497/P0113/000275 - Intake Air Temp. Sensor (G42): Signal too High
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
Possible Causes
- Fuse(s) faulty
- Wiring and/or Connector(s) from/to Intake Air Temp. Sensor (G42) faulty
- Intake Air Temp. Sensor (G42) faulty
Possible Solutions
- Check Fuse(s)
- Check Wiring and/or Connector(s) from/to Intake Air Temp. Sensor (G42)
- Check/Replace Intake Air Temp. Sensor (G42)