Difference between revisions of "01044"

Revision as of 18:23, 17 December 2006

DTC 01044 can show up in any Control Module in your car if that Module has a wrong software coding. Write down that software code and check/improve it with the help of Diagnostic_Procedures or http://de.openobd.org/ or http://en.openobd.org/
Some B5/3B Chassis Passats around model year 2000 have a firmware bug which causes this DTC in the 19-CAN Gateway module. Service documents for of those cars indicate that this DTC should be ignored in that module.

@@ Line 4: / Line 4: @@
 ==== Possible Symptoms ====
-* Maybe there are no symtoms
+* Possibly no symptoms at all
-* Maybe there is less functionality in certain Control Modules
+* Possible reduced functionality in certain Control Modules
 ==== Possible Causes ====
-* Wrong coding in Control Module
+* Incorrect coding in Control Module
 ==== Possible Solutions ====
-* Check coding in Control Module
+*  [http://www.ross-tech.com/vag-com/tour/recode_screen.html Code Control Module] correctly.
 ==== Special Notes ====
-* dtc 01044 can show up in any Control Module in your car when that Module has a wrong software code. Write down that software code and check/improve it with the help of http://de.openobd.org/ or http://en.openobd.org/
+* DTC 01044 can show up in any Control Module in your car if that Module has a wrong software coding. Write down that software code and check/improve it with the help of [[Diagnostic_Procedures]] or http://de.openobd.org/ or http://en.openobd.org/
-* Some Passats (in Europe) model year end 1999/beginning 2000 does have a firmwarebug which causes this dtc. Service documents of those cars does mention to ignore this dtc.
+* Some B5/3B Chassis Passats around model year 2000 have a firmware bug which causes this DTC in the 19-CAN Gateway module.  Service documents for of those cars indicate that this DTC should be ignored in that module.
 [[Category:Fault Codes]]