Difference between revisions of "01639"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
RtWiKiSyS0p (talk | contribs) m |
||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
| − | == | + | == 01639 - Crash Sensor Side Airbag; Rear Passenger Side (G257) == |
| − | === | + | === 01639 - Crash Sensor Side Airbag; Rear Passenger Side (G257): No or Incorrect Basic Setting / Adaptation === |
==== Possible Symptoms ==== | ==== Possible Symptoms ==== | ||
Revision as of 08:37, 20 September 2006
01639 - Crash Sensor Side Airbag; Rear Passenger Side (G257)
01639 - Crash Sensor Side Airbag; Rear Passenger Side (G257): No or Incorrect Basic Setting / Adaptation
Possible Symptoms
- Airbag Warning Light ON
Possible Causes
- Wrong Crash Sensor Side Airbag; Rear Passenger Side (G257) installed
Possible Solutions
- Install correct Crash Sensor Side Airbag; Rear Passenger Side (G257)
Special Notes
The Crash Sensor's can be checked by using the control module identification and the measuring blocks.
Address 15: Airbags Controller: 1T0 909 605 Component: 05 AIRBAG VW62 0506 2112 Coding: 0012341
The 0506 in this example stands for the required Crash Sensor ID, the first 2 digits (05) apply for the front crash sensors, while the second 2 digits (06) apply for the rear crash sensors. The ID of the currently installed Crash Sensors can be determinded by checking Measuring Value Block (MVB) 009.