Difference between revisions of "18261/P1853/006227"

From Ross-Tech Wiki
m
m
 
Line 13: Line 13:
 
==== Special Notes ====
 
==== Special Notes ====
  
* When found in [[6-Speed Direct Shift Gearbox (DSG/02E)]], perform [[6-Speed Direct Shift Gearbox (DSG/02E)#Reset Values (ESP & Tip Cruise Control Installation)|Reset ESP & Tip Cruise Control Installation]]
+
* When found in [[6-Speed Direct Shift Gearbox (DSG/02E)]], perform [[6-Speed Direct Shift Gearbox (DSG/02E)#Reset Values (ESP & Tip Cruise Control Installation)|Reset ESP & Tip Cruise Control Installation]].
 +
** Control Modules usually store a list of their Communication Partners, if this List changes (e.g. due to Replacements or Updates) the Transmission Control Module may store this Fault Code.
 
** '''[Select]'''
 
** '''[Select]'''
 
** '''[02 - Transmission]'''
 
** '''[02 - Transmission]'''

Latest revision as of 12:03, 31 March 2007

18261/P1853/006227 - Powertrain Data Bus: Implausible Message from ABS Controller

Possible Causes

  • CAN-Databus related Wiring/Connectors faulty

Possible Solutions

  • Check Measuring Value Blocks (MVB) 125+ for plausibility
  • Check Wiring/Connectors from/to ABS Control Module (J104)

Special Notes

  • When found in 6-Speed Direct Shift Gearbox (DSG/02E), perform Reset ESP & Tip Cruise Control Installation.
    • Control Modules usually store a list of their Communication Partners, if this List changes (e.g. due to Replacements or Updates) the Transmission Control Module may store this Fault Code.
    • [Select]
    • [02 - Transmission]
    • [Basic Settings - 04]
    • Group 069
    • [Go!]
    • Activate the Basic Setting.
    • [ON/OFF/Next]
    • [Done, Go Back]
    • [Close Controller, Go Back - 06]
    • Switch off Ignition, wait 10 Seconds and switch it back on and check for fault codes again.