18436/P2004/008196: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
RtWiKiSyS0p (talk | contribs) mNo edit summary |
|||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
== 18436/P2004/008196 - Intake Manifold Flap; Bank 1: Stuck Open == | == 18436/P2004/008196 - Intake Manifold Flap; Bank 1: Stuck Open == | ||
==== Possible Causes ==== | |||
* Vacuum leak | |||
* Faulty Intake Manifold Runner Position Sensor1 (G336) | |||
* Intake Manifold Runner binding or sticking | |||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
* Replaced failed vacuum line | |||
* Check Intake Manifold Runner Position Sensor 1 (G336) and wiring, see repair manual | |||
* Check Intake Manifold Flap | * Check Intake Manifold Flap | ||
** Use Output Test | ** Use Output Test | ||
Revision as of 20:16, 8 December 2010
18436/P2004/008196 - Intake Manifold Flap; Bank 1: Stuck Open
Possible Causes
- Vacuum leak
- Faulty Intake Manifold Runner Position Sensor1 (G336)
- Intake Manifold Runner binding or sticking
Possible Solutions
- Replaced failed vacuum line
- Check Intake Manifold Runner Position Sensor 1 (G336) and wiring, see repair manual
- Check Intake Manifold Flap
- Use Output Test
- Perform Basic Setting (Switch Ignition OFF between Output Test and Basic Setting)
Special Notes
- When found in Engine: 2.0l TFSI
- Perform Basic Setting.
- Check TPL 2016420 (RoW)
- Check Engine Control Module Software Version, if necessary perform Update.
- Replace Intake Manifold Runner (V157) with updated part.