16683/P0299/000665: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
RtWiKiSyS0p (talk | contribs) mNo edit summary |
RtWiKiSyS0p (talk | contribs) mNo edit summary |
||
| Line 20: | Line 20: | ||
* When found in [[2.0l TFSI (AXX/BGB/BPJ/BPY/BWA)|2.0l TFSI]]: | * When found in [[2.0l TFSI (AXX/BGB/BPJ/BPY/BWA)|2.0l TFSI]]: | ||
** Check Boost Pressure Control Valve (N249), for cracked rubber diaphragm. A new/optimized Valve is available under Part # | ** Check Boost Pressure Control Valve (N249), for cracked rubber diaphragm. A new/optimized Valve is available under Part # 06H-145-710-D (or newer), see TPI 2016331 for details. | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 17:26, 12 November 2010
16683/P0299/000665 - Boost Pressure Regulation: Control Range Not Reached
Possible Symptoms
- Reduced Power Output
- Limp Mode
Possible Causes
- Hoses/Pipes incorrect connected, disconnected or leaking
- Charger Pressure Control defective
Possible Solutions
- Check Hoses/Pipes to/between Components
- Check / Clean / Replace Charge Pressure Control
Special Notes
- When found in 2.0l TFSI:
- Check Boost Pressure Control Valve (N249), for cracked rubber diaphragm. A new/optimized Valve is available under Part # 06H-145-710-D (or newer), see TPI 2016331 for details.