Cruise Control Retrofitting (1K): Difference between revisions

From Ross-Tech Wiki
← Older editNewer edit →
No edit summary
mNo edit summary
Line 4: Line 4:
=== Steering Column Control Module ===
=== Steering Column Control Module ===


There are 3 types of steering column control modules, each of them has 3 variants. The type is depending on the installed slip ring, either use the part number of the currently installed module or the part number of the slip ring to determine the correct module for the vehicle in question. ''If a part number is not listed, registered VCDS users may [http://www.ross-tech.com/contact.html contact us] to ask for help with this topic.''
There are different types of steering column control modules, the type is depending on several individual options so we have compiled [[VW Golf (1K) Steering Wheel Versions|a list of available part numbers]] for you. ''If a part number is not listed, registered VCDS users may [http://www.ross-tech.com/contact.html contact us] to ask for help with this topic.''


 
* [[VW Golf (1K) Steering Wheel Versions|Steering Wheel Control Module Variants]]
* '''Type I''' ''(Compatible to Slip Ring: 1K0-959-653, 1K0-959-653-A)''
** '''Lowline'''
*** '''''Part Numbers''''': 1K0-953-549
** '''''Supported Features''''': ''None''
** '''Midline'''
*** '''''Part Numbers''''': 1K0-953-549-A
*** '''''Supported Features''''': Cruise Control, Trip Computer
** '''Highline'''
*** '''''Part Numbers''''': 1K0-953-549-B, 1K0-953-549-D, 1K0-953-549-AD, 1K0-953-549-AM
*** '''''Supported Features''''': Cruise Control, Trip Computer, Multi-Function Steering Wheel
 
 
* '''Type II''' ''(Compatible to Slip Ring 1K0-959-653-C and 1K0-959-653-D with Steering Angle Sensor)''
** '''Lowline'''
*** '''''Part Numbers''''': 1K0-953-549-E, 1K0-953-549-AE, 1K0-953-549-BM
** '''''Supported Features''''': ''None''
** '''Midline'''
*** '''''Part Numbers''''': 1K0-953-549-F, 1K0-953-549-AF, 1K0-953-549-AH, 1K0-953-549-AP, 1K0-953-549-BC, 1K0-953-549-BF, 1K0-953-549-BN, 1K0-953-549-BR, 1K0-953-549-CA
*** '''''Supported Features''''': Cruise Control, Trip Computer
** '''Highline'''
*** '''''Part Numbers''''': 1K0-953-549-G, 1K0-953-549-AG, 1K0-953-549-AK, 1K0-953-549-AL, 1K0-953-549-AQ, 1K0-953-549-BD, 1K0-953-549-BK, 1K0-953-549-CC
*** '''''Supported Features''''': Cruise Control, Trip Computer, Multi-Function Steering Wheel
 
Note: 1K0-953-549-BC may have a Bug which doesn't allow Cruise Control Retrofitting, in such a Case you need to replace the Module.
 
 
* '''Type III''' ''(Compatible to Slip Ring 1K0-959-653-C and 1K0-959-653-D without Steering Angle Sensor)''
** '''Lowline'''
*** '''''Part Numbers''''':
** '''''Supported Features''''': ''None''
** '''Midline'''
*** '''''Part Numbers''''': 1K0-953-549-CM, 1K0-953-549-CN
*** '''''Supported Features''''': Cruise Control, Trip Computer
** '''Highline'''
*** '''''Part Numbers''''': 1K0-953-549-CD, 1K0-953-549-CF, 1K0-953-549-CH
*** '''''Supported Features''''': Cruise Control, Trip Computer, Multi-Function Steering Wheel


== Installation & Wiring ==
== Installation & Wiring ==
Line 49: Line 13:


* Wire T20d/13 from steering column control module to engine control module (see wiring diagram specific your particular car/engine).
* Wire T20d/13 from steering column control module to engine control module (see wiring diagram specific your particular car/engine).
* Install cruise control capable lever (see parts catalog/repair manual).
* Install Cruise Control capable Lever (see Parts Catalog/Repair Manual for details).




Line 56: Line 20:
* Change [[VW Golf (1K) Steering Wheel#Coding|Steering Column Control Module Coding]].
* Change [[VW Golf (1K) Steering Wheel#Coding|Steering Column Control Module Coding]].
* Activate Cruise Control in the Engine Control Module.
* Activate Cruise Control in the Engine Control Module.
** See [[:Category:Engines|Engine specific Diagnostic Procedures]], it's most likely a Coding or Coding-II involved.
** See [[:Category:Engines|Engine specific Diagnostic Procedures]], depending on the Engine Control Module either Coding or Coding-II can be used.
** 1.8l and 2.0 TFSI usually require a change of the Long Coding while all other Engines use Coding-II instead.

Revision as of 16:59, 26 May 2010


Requirements

Steering Column Control Module

There are different types of steering column control modules, the type is depending on several individual options so we have compiled a list of available part numbers for you. If a part number is not listed, registered VCDS users may contact us to ask for help with this topic.

Installation & Wiring

In general the whole retrofit is just plug and play except that one wire may need to be added.

  • Wire T20d/13 from steering column control module to engine control module (see wiring diagram specific your particular car/engine).
  • Install Cruise Control capable Lever (see Parts Catalog/Repair Manual for details).


Activating Cruise Control

Retrieved from "https://wiki.ross-tech.com/wiki/index.php?title=Cruise_Control_Retrofitting_(1K)&oldid=4938"
Contact Privacy Accessibility