16816/P0432: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
| Line 14: | Line 14: | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
* Inspect cat for internal rattle, replace if needed | * Inspect cat for internal rattle, replace if needed | ||
* Perform | * Check Oxygen Sensor(s) | ||
* | * Check Oxygen Sensor(s) Control | ||
* Confirm there are no exhaust leaks | * Perform Oxygen Sensor(s) Aging Check | ||
* Check ECM | * Set Readiness | ||
* Confirm there are no exhaust leaks | |||
* Check ECM for firmware updates | |||
==== Special Notes ==== | ==== Special Notes ==== | ||
Revision as of 18:28, 9 February 2011
16816/P0432 - Main Catalyst: Bank 2: Efficiency Below Threshold
Possible Symptoms
- * Malfunction Indicator Light (MIL) ON
Possible Causes
- Failed ceramic monolith in Catalyst
- Oxygen Sensor(s) defective
- Leak in exhaust system
- Firmware issue with ECM
Possible Solutions
- Inspect cat for internal rattle, replace if needed
- Check Oxygen Sensor(s)
- Check Oxygen Sensor(s) Control
- Perform Oxygen Sensor(s) Aging Check
- Set Readiness
- Confirm there are no exhaust leaks
- Check ECM for firmware updates
Special Notes
- For Audi engine codes ART or AKB, please see TSB 26-04-01
- For Audi engine code ATQ, please see TSB 26-08-07
- For Volkswagen engines, please see TSB 01-07-07
- As per TSB 01-07-54, do not replace the ECM for this DTC. Please see TSB for complete details.