Difference between revisions of "01128"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
|||
| Line 20: | Line 20: | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
| − | * Pickup Coils for Immobilizer 2 and 3 Systems should read ~ | + | * Pickup Coils for Immobilizer 2 and 3 Systems should read ~ 18 to 24 Ω |
__FORCETOC__ | __FORCETOC__ | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 10:37, 31 October 2016
01128 - Immobilizer Pickup Coil (D2)
Possible Symptoms
- Immobilizer Warning Light flashing
- Immobilizer active (Engine shuts OFF after 2-3 Seconds)
Possible Causes
- Wiring and/or Connector(s) from/to Immobilizer Pickup Coil (D2) faulty
- Immobilizer Pickup Coil (D2) faulty
- Immobilzier Control Module faulty
Possible Solutions
- Check Wiring and/or Connector(s) from/to Immobilizer Pickup Coil (D2)
- Check/Replace Immobilizer Pickup Coil (D2)
- Check Measuring Value Blocks (MVB)
Special Notes
- Pickup Coils for Immobilizer 2 and 3 Systems should read ~ 18 to 24 Ω