Difference between revisions of "Bentley Continental (3W) Automatic Roof"
From Ross-Tech Wiki
| Line 9: | Line 9: | ||
* Vehicle system voltage above 12.0v (Engine running) | * Vehicle system voltage above 12.0v (Engine running) | ||
* All doors and lids shut | * All doors and lids shut | ||
| − | * No faults in the | + | * No faults in the [[26-Automatic Roof]] controller |
* Convertible Top in good condition, no damage | * Convertible Top in good condition, no damage | ||
* Convertible Top Closed and locked | * Convertible Top Closed and locked | ||
Revision as of 12:02, 12 April 2018
Additional information can be found in the Official Factory Repair Information.
Adaptation
Prerequisites: End Stops
- Vehicle system voltage above 12.0v (Engine running)
- All doors and lids shut
- No faults in the 26-Automatic Roof controller
- Convertible Top in good condition, no damage
- Convertible Top Closed and locked
Channel 00: Delete End Stops
To reset the learned End Stops, save a new value of 0
- Then follow with the Relearn End Stops.
Channel 01: Relearn End Stops
To start the relearn the End Stops, save a new value of 1
- Open the Convertible Top to 'Relearn' the End Stops.
- Check for and clear any fault codes.
- Check for proper Convertible Top Operation