Difference between revisions of "Audi A4/S4/RS4/Cabriolet (8E/8H)"
RtWiKiSyS0p (talk | contribs) |
RtWiKiSyS0p (talk | contribs) m |
||
| Line 6: | Line 6: | ||
'''[Select]'''<br> | '''[Select]'''<br> | ||
'''[03 - ABS Brakes]'''<br> | '''[03 - ABS Brakes]'''<br> | ||
| + | |||
'''[Fault Codes - 02]'''<br> | '''[Fault Codes - 02]'''<br> | ||
'''[Done, Go Back]'''<br> | '''[Done, Go Back]'''<br> | ||
| Line 25: | Line 26: | ||
'''[Go!]'''<br> | '''[Go!]'''<br> | ||
'''[Done, Go Back]'''<br> | '''[Done, Go Back]'''<br> | ||
| + | |||
'''[Fault Codes - 02]'''<br> | '''[Fault Codes - 02]'''<br> | ||
All fault codes should have disappeared.<br> | All fault codes should have disappeared.<br> | ||
'''[Done, Go Back]'''<br> | '''[Done, Go Back]'''<br> | ||
| + | |||
'''[Close Controller, Go Back - 06]'''<br> | '''[Close Controller, Go Back - 06]'''<br> | ||
| Line 36: | Line 39: | ||
'''[Select]'''<br> | '''[Select]'''<br> | ||
'''[03 - ABS Brakes]'''<br> | '''[03 - ABS Brakes]'''<br> | ||
| + | |||
'''[Fault Codes - 02]'''<br> | '''[Fault Codes - 02]'''<br> | ||
'''[Done, Go Back]'''<br> | '''[Done, Go Back]'''<br> | ||
| Line 57: | Line 61: | ||
'''[Go!]'''<br> | '''[Go!]'''<br> | ||
'''[Done, Go Back]'''<br> | '''[Done, Go Back]'''<br> | ||
| + | |||
'''[Fault Codes - 02]'''<br> | '''[Fault Codes - 02]'''<br> | ||
All fault codes should have disappeared.<br> | All fault codes should have disappeared.<br> | ||
'''[Done, Go Back]'''<br> | '''[Done, Go Back]'''<br> | ||
| + | |||
'''[Close Controller, Go Back - 06]'''<br> | '''[Close Controller, Go Back - 06]'''<br> | ||
Revision as of 21:11, 11 December 2005
Brake Electronics (Bosch 5.7)
Control Module Basic Setting: Steering Angle Sensor (G85) Calibration
[Select]
[03 - ABS Brakes]
[Fault Codes - 02]
[Done, Go Back]
Turn steering wheel at least 30 ° left and back straight ahead.
[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]
[Login - 11]
Enter 40168
[Do It!]
[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]
[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]
[Close Controller, Go Back - 06]
Brake Electronics (Bosch 8.0)
Control Module Basic Setting: Steering Angle Sensor (G85) Calibration
[Select]
[03 - ABS Brakes]
[Fault Codes - 02]
[Done, Go Back]
Start Engine (session still running).
Turn steering wheel at least 30 ° left and back straight ahead.
[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]
[Security Access - 16]
Enter 40168
[Do It!]
[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]
[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]
[Close Controller, Go Back - 06]