VW Passat (3C) Parking Brake: Difference between revisions
Table Of Contents
- 1. Coding
- 2. Adaptation
-
3.
Basic Setting
- 3.1.3 Open Rear Parking Brake
- 3.2.3 Close Rear Parking Brake
- 3.3.3 Function Test
RtWiKiSyS0p (talk | contribs) mNo edit summary |
RtWiKiSyS0p (talk | contribs) No edit summary |
||
| Line 12: | Line 12: | ||
== Basic Setting == | == Basic Setting == | ||
=== | === Open Rear Parking Brake === | ||
'''[Select]'''<br> | '''[Select]'''<br> | ||
| Line 22: | Line 22: | ||
'''[ON/OFF/Next]'''<br> | '''[ON/OFF/Next]'''<br> | ||
The brake pads are now opening.<br> | The brake pads are now opening.<br> | ||
'''[Done, Go Back]'''<br><br> | '''[Done, Go Back]'''<br> | ||
'''[Close Controller, Go Back - 06]'''<br><br> | |||
=== | ---- | ||
=== Close Rear Parking Brake === | |||
'''[Select]'''<br> | '''[Select]'''<br> | ||
| Line 34: | Line 36: | ||
'''[ON/OFF/Next]'''<br> | '''[ON/OFF/Next]'''<br> | ||
The brake pads are now closing.<br> | The brake pads are now closing.<br> | ||
'''[Done, Go Back]'''<br><br> | '''[Done, Go Back]'''<br> | ||
'''[Close Controller, Go Back - 06]'''<br><br> | |||
=== | ---- | ||
=== Function Test === | |||
'''[Select]'''<br> | '''[Select]'''<br> | ||
| Line 47: | Line 51: | ||
The brake pads are now opening and closing 3 times.<br> | The brake pads are now opening and closing 3 times.<br> | ||
'''[Done, Go Back]'''<br> | '''[Done, Go Back]'''<br> | ||
'''[Close Controller, Go Back - 06]'''<br><br> | |||
---- | |||
=== Longitudinal Acceleration Sensor (G251) === | |||
'''[Select]'''<br> | |||
'''[03 - Brake Electronics]'''<br> | |||
'''[Measuring Blocks - 08]'''<br> | |||
Group 004<br> | |||
'''[Go!]'''<br> | |||
Check field 4, the value has to be between -1.5 and +1.5 m/s².<br> | |||
'''[Done, Go Back]'''<br> | |||
'''[Close Controller, Go Back - 06]'''<br><br> | |||
'''[53 - Parking Brake]'''<br> | |||
'''[Basic Settings - 04]'''<br> | |||
Group 020<br> | |||
'''[Go!]'''<br> | |||
Activate the Basic Setting.<br> | |||
'''[ON/OFF/Next]'''<br> | |||
The status of the Longitudinal Acceleration Sensor (G251) is now beeing displayed.<br> | |||
'''[Done, Go Back]'''<br> | |||
To make sure the basic setting was succesful, check the sensor again.<br> | |||
'''[Close Controller, Go Back - 06]'''<br><br> | |||
'''[03 - Brake Electronics]'''<br> | |||
'''[Measuring Blocks - 08]'''<br> | |||
Group 004<br> | |||
'''[Go!]'''<br> | |||
Check field 4, the value has to be between -2.5 and +2.5 m/s².<br> | |||
'''[Done, Go Back]'''<br> | |||
'''[Close Controller, Go Back - 06]'''<br> | |||
Revision as of 16:14, 31 March 2006
Coding
- 0000010 = Parking Brake without Auto-Hold (North America)
- 0000011 = Parking Brake without Auto-Hold (Rest of World / PR-UH1)
- 0000012 = Parking Brake with Auto-Hold (Rest of World / PR-UH2)
- 0000013 = Parking Brake with Auto-Hold (North America)
Adaptation
Basic Setting
Open Rear Parking Brake
[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 007
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now opening.
[Done, Go Back]
[Close Controller, Go Back - 06]
Close Rear Parking Brake
[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 006
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now closing.
[Done, Go Back]
[Close Controller, Go Back - 06]
Function Test
[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 010
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now opening and closing 3 times.
[Done, Go Back]
[Close Controller, Go Back - 06]
Longitudinal Acceleration Sensor (G251)
[Select]
[03 - Brake Electronics]
[Measuring Blocks - 08]
Group 004
[Go!]
Check field 4, the value has to be between -1.5 and +1.5 m/s².
[Done, Go Back]
[Close Controller, Go Back - 06]
[53 - Parking Brake]
[Basic Settings - 04]
Group 020
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The status of the Longitudinal Acceleration Sensor (G251) is now beeing displayed.
[Done, Go Back]
To make sure the basic setting was succesful, check the sensor again.
[Close Controller, Go Back - 06]
[03 - Brake Electronics]
[Measuring Blocks - 08]
Group 004
[Go!]
Check field 4, the value has to be between -2.5 and +2.5 m/s².
[Done, Go Back]
[Close Controller, Go Back - 06]
No categories.