Difference between revisions of "Audi A8 (4E) Parking Brake"
RtWiKiSyS0p (talk | contribs) |
RtWiKiSyS0p (talk | contribs) m |
||
| Line 28: | Line 28: | ||
'''[Close Controller, Go Back - 06]'''<br> | '''[Close Controller, Go Back - 06]'''<br> | ||
| − | '''''Note:''' Check/change adaptation channel 006 after changing the pads.''<br><br> | + | '''''Note:''' Check/change adaptation channel 006 ([[#Pad Thickness|Pad Thickness]]) after changing the pads.''<br><br> |
---- | ---- | ||
Revision as of 09:12, 3 April 2006
Coding
Adaptation
Pad Thickness
[Select]
[53 - Parking Brake]
[Adaptation - 10]
Channel 006
[Read]
Enter the current thickness of the new pads (Range: 3 - 14 mm).
[Test]
[Save]
[Done, Go Back]
Basic Setting
Open Rear Parking Brake for Pad Change
[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 005
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now opening.
[Done, Go Back]
[Close Controller, Go Back - 06]
Note: Check/change adaptation channel 006 (Pad Thickness) after changing the pads.
Open Rear Parking Brake for Repairs
[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 007
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now opening.
[Done, Go Back]
[Close Controller, Go Back - 06]
Close Rear Parking Brake
[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 006
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now closing.
[Done, Go Back]
[Close Controller, Go Back - 06]