6-Speed Direct Shift Gearbox (DSG/02E): Difference between revisions
From Ross-Tech Wiki
Table Of Contents
- 1. Basic Setting
-
2.
Special Procedures
- 2.1.2 "Defined" Test Drive
RtWiKiSyS0p (talk | contribs) mNo edit summary |
RtWiKiSyS0p (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
== Basic Setting == | |||
== Special Procedures == | |||
=== "Defined" Test Drive === | |||
''Suggested test drive after replacing the mechatronic or successful basic setting.''<br><br> | |||
'''<u>Prerequisites:</u>'''<br> | |||
* ATF Temperature 30...100 °C (86...210 °F) | |||
'''''NOTE:''' If the test drive cannot be performed in the recommended way or the necessary time, the remaining quick adaptations are performed automatically in the following driving cycles.'' | |||
[[Category:Transmissions]] | [[Category:Transmissions]] | ||
Revision as of 10:30, 6 April 2006
Basic Setting
Special Procedures
"Defined" Test Drive
Suggested test drive after replacing the mechatronic or successful basic setting.
Prerequisites:
- ATF Temperature 30...100 °C (86...210 °F)
NOTE: If the test drive cannot be performed in the recommended way or the necessary time, the remaining quick adaptations are performed automatically in the following driving cycles.