01273: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
01273 - Fresh Air Blower (V2)
- 1.1.1 Possible Causes
- 1.2.1 Possible Solutions
RtWiKiSyS0p (talk | contribs) mNo edit summary |
RtWiKiSyS0p (talk | contribs) mNo edit summary |
||
| Line 6: | Line 6: | ||
* Fresh Air Blower (V2) defective | * Fresh Air Blower (V2) defective | ||
* Control Module for Fresh Air Blower (J126) defective | * Control Module for Fresh Air Blower (J126) defective | ||
* Wiring defective | |||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
| Line 14: | Line 15: | ||
* Check Control Module for Fresh Air Blower (J126) | * Check Control Module for Fresh Air Blower (J126) | ||
** Perform Output Test (Check Air Vents while Blower is active) | ** Perform Output Test (Check Air Vents while Blower is active) | ||
* Check wiring | |||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 10:00, 22 April 2006
01273 - Fresh Air Blower (V2)
Possible Causes
- Fresh Air Blower (V2) defective
- Control Module for Fresh Air Blower (J126) defective
- Wiring defective
Possible Solutions
- Check Fresh Air Blower (V2)
- Perform Output Test (Check Air Vents while Blower is active)
- Check Meas. Blocks while Blower is active
- Check Control Module for Fresh Air Blower (J126)
- Perform Output Test (Check Air Vents while Blower is active)
- Check wiring