Difference between revisions of "Audi A4 (8E) Brake Electronics (Bosch 5.7)"
RtWiKiSyS0p (talk | contribs) m (Audi A4/S4/Cabriolet (8E/8H) Brake Electronics (Bosch 5.7) moved to Audi A4 (8E) Brake Electronics (Bosch 5.7)) |
RtWiKiSyS0p (talk | contribs) |
||
Line 1: | Line 1: | ||
+ | __FORCETOC__ | ||
+ | == Login == | ||
+ | |||
+ | '''''Note #1''': ''After Login has been carried out you need to recode the control module.''<br> | ||
+ | '''''Note #2''': ''Special Login 09399 is used for BFB Engine with 1LT Brakes and Multitronic.''<br> | ||
+ | |||
+ | *'''0?xxx''': ''Chassis'' | ||
+ | **9 = Audi A4 | ||
+ | *'''0x?xx''': ''Brakes'' | ||
+ | **2 = Brembo 17" (PR-1LJ) | ||
+ | **3 = FN3 16" (PR-1LT/1LF) | ||
+ | **4 = HP2 16" (PR-1LX) | ||
+ | **4 = FNR 16" (PR-1LA/1LG) | ||
+ | **5 = FN3 15" (PR-1LB/1LE) | ||
+ | **6 = C54 (PR-1LZ) | ||
+ | *'''0xx?x''': ''Engine'' | ||
+ | **5 = 4/6 Cyl. Diesel | ||
+ | **7 = 4/5 Cyl. Gasoline | ||
+ | **9 = 6/8 Cyl. Gasoline | ||
+ | *'''0xxx?''': ''Transmission'' | ||
+ | **5 = Manual | ||
+ | **7 = Automatic (5HP19, 5HP24, AG4, AG5) | ||
+ | **9 = Multitronic | ||
+ | |||
+ | == Coding == | ||
+ | |||
+ | '''''Note #1''': Coding is accepted after a specific login has been carried out.''<br> | ||
+ | '''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.''<br> | ||
+ | '''''Note #3''': Special Coding 04499 is used for BFB Engine with 1LT Brakes and Multitronic.''<br> | ||
+ | |||
+ | *'''0?xxx''': ''Chassis'' | ||
+ | **4 = Audi A4 | ||
+ | *'''0x?xx''': ''Brakes'' | ||
+ | **1 = C54 (PR-1LZ) | ||
+ | **2 = FN3 15" (PR-1LB/1LE) | ||
+ | **3 = HP2 16" (PR-1LX) | ||
+ | **3 = FNR 16" (PR-1LG) | ||
+ | **4 = FN3 16" (PR-1LT/1LF) | ||
+ | **5 = Brembo 17" (PR-1LJ) | ||
+ | *'''0xx?x''': ''Engine'' | ||
+ | **5 = 4/6 Cyl. Diesel | ||
+ | **7 = 4/5 Cyl. Gasoline | ||
+ | **9 = 6/8 Cyl. Gasoline | ||
+ | *'''0xxx?''': ''Transmission'' | ||
+ | **5 = Manual | ||
+ | **7 = Automatic (5HP19, 5HP24, AG4, AG5) | ||
+ | **9 = Multitronic | ||
+ | |||
+ | |||
== Basic Setting == | == Basic Setting == | ||
Revision as of 14:24, 29 April 2006
Login
Note #1: After Login has been carried out you need to recode the control module.
Note #2: Special Login 09399 is used for BFB Engine with 1LT Brakes and Multitronic.
- 0?xxx: Chassis
- 9 = Audi A4
- 0x?xx: Brakes
- 2 = Brembo 17" (PR-1LJ)
- 3 = FN3 16" (PR-1LT/1LF)
- 4 = HP2 16" (PR-1LX)
- 4 = FNR 16" (PR-1LA/1LG)
- 5 = FN3 15" (PR-1LB/1LE)
- 6 = C54 (PR-1LZ)
- 0xx?x: Engine
- 5 = 4/6 Cyl. Diesel
- 7 = 4/5 Cyl. Gasoline
- 9 = 6/8 Cyl. Gasoline
- 0xxx?: Transmission
- 5 = Manual
- 7 = Automatic (5HP19, 5HP24, AG4, AG5)
- 9 = Multitronic
Coding
Note #1: Coding is accepted after a specific login has been carried out.
Note #2: After successful coding the steering angle sensor basic setting needs to be carried out.
Note #3: Special Coding 04499 is used for BFB Engine with 1LT Brakes and Multitronic.
- 0?xxx: Chassis
- 4 = Audi A4
- 0x?xx: Brakes
- 1 = C54 (PR-1LZ)
- 2 = FN3 15" (PR-1LB/1LE)
- 3 = HP2 16" (PR-1LX)
- 3 = FNR 16" (PR-1LG)
- 4 = FN3 16" (PR-1LT/1LF)
- 5 = Brembo 17" (PR-1LJ)
- 0xx?x: Engine
- 5 = 4/6 Cyl. Diesel
- 7 = 4/5 Cyl. Gasoline
- 9 = 6/8 Cyl. Gasoline
- 0xxx?: Transmission
- 5 = Manual
- 7 = Automatic (5HP19, 5HP24, AG4, AG5)
- 9 = Multitronic
Basic Setting
Steering Angle Sensor (G85) Calibration
[Select]
[03 - ABS Brakes]
[Fault Codes - 02]
[Done, Go Back]
Turn steering wheel at least 30 ° left and back straight ahead.
[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]
[Login - 11]
Enter 40168
[Do It!]
[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]
[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]
[Close Controller, Go Back - 06]