Difference between revisions of "01638"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
RtWiKiSyS0p (talk | contribs) m |
||
| Line 10: | Line 10: | ||
==== Possible Causes ==== | ==== Possible Causes ==== | ||
| + | * Wiring/Connectors from/to Crash Sensor Side Airbag; Rear Drivers Side (G256) faulty | ||
* Crash Sensor Side Airbag; Rear Drivers Side (G256) faulty | * Crash Sensor Side Airbag; Rear Drivers Side (G256) faulty | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
| + | * Check/Replace Wiring/Connectors from/to Crash Sensor Side Airbag; Rear Drivers Side (G256) | ||
* Check/Replace Crash Sensor Side Airbag; Rear Drivers Side (G256) | * Check/Replace Crash Sensor Side Airbag; Rear Drivers Side (G256) | ||
Revision as of 22:02, 5 March 2007
01638 - Crash Sensor Side Airbag; Rear Drivers Side (G256)
01638 - Crash Sensor Side Airbag; Rear Drivers Side (G256): Faulty
Possible Symptoms
- Airbag Warning Light ON
Possible Causes
- Wiring/Connectors from/to Crash Sensor Side Airbag; Rear Drivers Side (G256) faulty
- Crash Sensor Side Airbag; Rear Drivers Side (G256) faulty
Possible Solutions
- Check/Replace Wiring/Connectors from/to Crash Sensor Side Airbag; Rear Drivers Side (G256)
- Check/Replace Crash Sensor Side Airbag; Rear Drivers Side (G256)
01638 - Crash Sensor Side Airbag; Rear Drivers Side (G256): No or Incorrect Basic Setting / Adaptation
Possible Symptoms
- Airbag Warning Light ON
Possible Causes
- Wrong Crash Sensor Side Airbag; Rear Drivers Side (G256) installed
Possible Solutions
- Install correct Crash Sensor Side Airbag; Rear Drivers Side (G256)
Special Notes
The Crash Sensors can be checked by using the control module identification and the measuring blocks.
Address 15: Airbags Controller: 1T0 909 605 Component: 05 AIRBAG VW62 0506 2112 Coding: 0012341
The 0506 in this example stands for the required Crash Sensor ID, the first 2 digits (05) apply for the front crash sensors, while the second 2 digits (06) apply for the rear crash sensors. The ID of the currently installed Crash Sensors can be determinded by checking Measuring Value Block (MVB) 009.