VW Touareg (7L) Heating/Air Conditioning

Coding

• 000xx?0: Glass Type
  • 2 = Standard Glass (Clear Glass)
  • 3 = Thermal Protection Glass (Insulated/Acoustic Glass)
• 000x?x0: Roof
  • 0 = Solar Roof not installed
  • 2 = Solar Roof installed
• 000?xx0: Refrigerant Loss Recognition
  • 0 = Refrigerant Temperature Sensor installed (Recognition activated)
  • 1 = Refrigerant Temperature Sensor not installed (Recognition deactivated)

Basic Setting

Normal (Potentiometer & Flap Adaptation)

Prerequisites:

[Select]
[08 - Heating/Air Conditioning]
[Basic Settings - 04]
Group 001
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The basic setting takes approximately 25 seconds.
[Done, Go Back]
[Close Controller, Go Back - 06]

Service Position

Notes:

• Has to be performed before ANY Actuators/Motors are being removed.
• While in Service Position the Display reads SF (German for "Servicefall").
• Make sure to have the Ignition OFF while working on the Actuators/Motors.
• Once all work has been done, switch ON the Ignition and perform the normal Basic Setting (Potentiometer & Flap Adaptation).

[Select]
[08 - Heating/Air Conditioning]
[Basic Settings - 04]
Group 002
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The Display should read SFnow.
[Done, Go Back]
[Close Controller, Go Back - 06]