Difference between revisions of "01316"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
RtWiKiSyS0p (talk | contribs) m |
||
| Line 6: | Line 6: | ||
==== Possible Causes ==== | ==== Possible Causes ==== | ||
| − | * | + | * Wiring/Connector(s) from/to ABS Control Module faulty |
* Fault(s) stored in ABS Control Module | * Fault(s) stored in ABS Control Module | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
| − | * Check | + | * Check Wiring/Connector(s) from/to ABS Control Module |
* Check Measuring Value Blocks (MVB) | * Check Measuring Value Blocks (MVB) | ||
** Usually Measuring Value Blocks (MVB) 125+ show the current Communication Status | ** Usually Measuring Value Blocks (MVB) 125+ show the current Communication Status | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 09:57, 6 March 2008
01316 - ABS Control Module
01316 - ABS Control Module: No Signal/Communication
Possible Causes
- Wiring/Connector(s) from/to ABS Control Module faulty
- Fault(s) stored in ABS Control Module
Possible Solutions
- Check Wiring/Connector(s) from/to ABS Control Module
- Check Measuring Value Blocks (MVB)
- Usually Measuring Value Blocks (MVB) 125+ show the current Communication Status