01521: Difference between revisions

Revision as of 23:45, 7 April 2008

Check/Install Tire Pressure Sensors
- Check individual Sensors via Measuring Value Blocks (MVB)

On Systems without Position Recognition (e.g. Golf/Jetta (1K) or Passat (3C)) raise or lower the Pressure for one Tire after the other and double check the Measuring Value Blocks (MVB) 001-012 (and 016) for changes. If you can determine no Change in the Measuring Value Blocks (MVB) after raising/lowering the Pressure you have most likely found the faulty Sensor.
- Note: It may take up to 2 minutes until the Pressure Change is being displayed in the Measuring Value Block (MVB). To locate the individual Wheels it helps to note the Sensor Identification Number.

@@ Line 18: / Line 18: @@
 * Check Tire Pressure
 * Check/Install Tire Pressure Sensors
+=== 01521 - Sensor for Tire Pressure: No Signal/Communication ===
+==== Possible Symptoms ====
+* Malfunction Indicator Light (MIL) active
+==== Possible Causes ====
+* Tire Pressure Sensor(s) faulty
+* Tire Pressure Sensor(s) not installed
+==== Possible Solutions ====
+* Check/Install Tire Pressure Sensors
+** Check individual Sensors via Measuring Value Blocks (MVB)
+==== Special Notes ====
+* On Systems without Position Recognition (e.g. Golf/Jetta (1K) or Passat (3C)) raise or lower the Pressure for one Tire after the other and double check the Measuring Value Blocks (MVB) 001-012 (and 016) for changes. If you can determine no Change in the Measuring Value Blocks (MVB) after raising/lowering the Pressure you have most likely found the faulty Sensor.
+** ''Note: It may take up to 2 minutes until the Pressure Change is being displayed in the Measuring Value Block (MVB). To locate the individual Wheels it helps to note the Sensor Identification Number.''
 [[Category:Fault Codes]]