01042: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
01042 - Control Module; Not Coded
- 1.1.1 Possible Symptoms
- 1.2.1 Possible Causes
- 1.3.1 Possible Solutions
- 1.4.1 Special Notes
RtWiKiSyS0p (talk | contribs) No edit summary |
RtWiKiSyS0p (talk | contribs) mNo edit summary |
||
| Line 19: | Line 19: | ||
* When found in [[Audi A8/S8 (4E)]]: [[Audi A8 (4E) Headlight Aim Control (Adaptive Light)|Headlight Aim Control (Adaptive Light)]], perform [[Audi A8 (4E) Headlight Aim Control (Adaptive Light)#Coding|Coding]]. | * When found in [[Audi A8/S8 (4E)]]: [[Audi A8 (4E) Headlight Aim Control (Adaptive Light)|Headlight Aim Control (Adaptive Light)]], perform [[Audi A8 (4E) Headlight Aim Control (Adaptive Light)#Coding|Coding]]. | ||
* When found in [[VW Passat (3C)]]: [[VW Passat (3C) Headlight Aim Control (Xenon with AFS)|Headlight Aim Control]], perform [[VW Passat (3C) Headlight Aim Control (Xenon with AFS)#Coding|Coding]]. | * When found in [[VW Passat (3C)]]: [[VW Passat (3C) Headlight Aim Control (Xenon with AFS)|Headlight Aim Control]], perform [[VW Passat (3C) Headlight Aim Control (Xenon with AFS)#Coding|Coding]]. | ||
* In certain cases this code may be stored even after properly coding a module (e.g. VW RNS510). In such cases make sure to use a proper workshop code (WSC), importer and device number. Those have | * In certain cases this code may be stored even after properly coding a module (e.g. VW RNS510). In such cases make sure to use a proper workshop code (WSC), importer and device number. Those have to be non-0 values, so for example 12345-123-12345 should do it. | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 07:37, 25 September 2008
01042 - Control Module; Not Coded
Possible Symptoms
- Malfunction Indicator Light (MIL) active
Possible Causes
- Control Module not coded
Possible Solutions
- Check Control Module Coding
- Cross Reference Control Module Coding with related Control Modules (e.g. for Country or Powertrain Settings)
Special Notes
- When found in Audi A8/S8 (4E): Headlight Aim Control (Adaptive Light), perform Coding.
- When found in VW Passat (3C): Headlight Aim Control, perform Coding.
- In certain cases this code may be stored even after properly coding a module (e.g. VW RNS510). In such cases make sure to use a proper workshop code (WSC), importer and device number. Those have to be non-0 values, so for example 12345-123-12345 should do it.