Difference between revisions of "01318"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
RtWiKiSyS0p (talk | contribs) |
||
Line 2: | Line 2: | ||
== 01318 - Control Module for Injection Pump (J399) == | == 01318 - Control Module for Injection Pump (J399) == | ||
− | === 01318 - Control Module for Injection Pump (J399): No | + | === 01318 - Control Module for Injection Pump (J399): No Communications === |
==== Possible Symptoms ==== | ==== Possible Symptoms ==== |
Revision as of 14:24, 28 April 2009
01318 - Control Module for Injection Pump (J399)
01318 - Control Module for Injection Pump (J399): No Communications
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
Possible Causes
- Wiring and/or Connector(s) from/to Injection Pump (J399) faulty
- Injection Pump (J399) faulty
Possible Solutions
- Check Wiring and/or Connector(s) from/to Injection Pump (J399)
- Check Communication to Injection Pump (J399)
- See Measuring Value Block (MVB) 018
- Check/Replace Injection Pump (J399)
Special Notes
- When found on 2.5l V6 TDI, has a Compression Test been performed? This code may be stored in Combination with a Compression Test even though the Communication is OK. Under these Circumstances this Fault Code should be cleared.
01318 - Control Module for Injection Pump (J399): No Elaboration Available
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
Possible Causes
- Control Module Software Issue
Special Notes
- When found on 2.5l V6 TDI, contact Ross-Tech for Assistance.