Difference between revisions of "18061/P1653/005715"

From Ross-Tech Wiki
 
m
 
Line 4: Line 4:
 
==== Possible Symptoms ====
 
==== Possible Symptoms ====
  
* Malfunction Indicator Light (MIL) active
+
* Malfunction Indicator Light (MIL) ON
  
 
==== Possible Causes ====
 
==== Possible Causes ====
  
* Fault Code(s) stored in Brake Electronics (ABS)
+
* Fault Code / Diagnostic Trouble Code (DTC) stored in Brake Electronics Control Module (J104)
  
 
==== Possible Solutions ====
 
==== Possible Solutions ====
  
* Check/Fix Fault Code(s) in Brake Electronics (ABS)
+
* Check Brake Electronics Control Module (J104) for Fault Codes
 +
** ''VCDS > Select > 03 - Brake Electronics > Fault Codes - 02''
  
 
==== Special Notes ====
 
==== Special Notes ====
  
* This fault code is a note since the system it is stored in interacts with the Brake Electronics (ABS) and due to a fault code there it may not be fully functional.
+
* A Fault Code stored in one Module may influence other Modules as well, if a Control Module requires certain Information/Signals and the sending Module/Component is faulty it may store this Code.
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Latest revision as of 04:45, 13 July 2009

18061/P1653/005715 - Please check DTC Memory of ABS Controller

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON

Possible Causes

  • Fault Code / Diagnostic Trouble Code (DTC) stored in Brake Electronics Control Module (J104)

Possible Solutions

  • Check Brake Electronics Control Module (J104) for Fault Codes
    • VCDS > Select > 03 - Brake Electronics > Fault Codes - 02

Special Notes

  • A Fault Code stored in one Module may influence other Modules as well, if a Control Module requires certain Information/Signals and the sending Module/Component is faulty it may store this Code.