01273: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
01273 - Fresh Air Blower (V2)
- 1.1.1 Possible Causes
- 1.2.1 Possible Solutions
| Line 16: | Line 16: | ||
* Check Control Module for Fresh Air Blower (J126) | * Check Control Module for Fresh Air Blower (J126) | ||
** Perform Output Test (Check Air Vents while Blower is active) | ** Perform Output Test (Check Air Vents while Blower is active) | ||
* Check wiring | * Check wiring and connectors | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 02:46, 1 September 2009
01273 - Fresh Air Blower (V2)
Possible Causes
- Fresh Air Blower (V2) defective
- Control Module for Fresh Air Blower (J126) defective
- Short of open circuit in wiring to Fresh Air Blower (V2)
- Climatronic Control Module (J255) malfunctioning
Possible Solutions
- Check Fresh Air Blower (V2)
- Perform Output Test (Check Air Vents while Blower is active)
- Check Meas. Blocks while Blower is active
- Check Control Module for Fresh Air Blower (J126)
- Perform Output Test (Check Air Vents while Blower is active)
- Check wiring and connectors