Difference between revisions of "VW Golf (1K) Comfort System"

From Ross-Tech Wiki
m
Line 4: Line 4:
  
 
'''[Select]'''<br>
 
'''[Select]'''<br>
'''[46 - Comfort System]'''<br>
+
'''[46 - Central Conv.]'''<br>
 
'''[Adaptation - 10]'''<br>
 
'''[Adaptation - 10]'''<br>
 
Channel 000.<br>
 
Channel 000.<br>
Line 17: Line 17:
  
 
'''[Select]'''<br>
 
'''[Select]'''<br>
'''[46 - Comfort System]'''<br>
+
'''[46 - Central Conv]'''<br>
 
'''[Adaptation - 10]'''<br>
 
'''[Adaptation - 10]'''<br>
 
Channel 001.<br>
 
Channel 001.<br>

Revision as of 21:45, 20 January 2010

Coding

Adaptation

Channel 000: Remote Control Clearing

[Select]
[46 - Central Conv.]
[Adaptation - 10]
Channel 000.
[Read]
To clear all matched remote controls press save.
[Save]
[Done, Go Back]
[Close Controller, Go Back - 06]


Channel 001: Remote Control Matching

[Select]
[46 - Central Conv]
[Adaptation - 10]
Channel 001.
[Read]

Note: The value does NOT show the actual number of adapted remotes.

  • 0 = All memory positions occupied, matching of additionals keys not possible, clear memory positons first.
  • 1 = Matching of additional remotes possible.


  • Start matching new/additional remotes with entering "1" as new value.

[Test]
[Save]

Note: The time for matching remotes after saving the new value should not exceed 30 seconds. You can add a maximum of 4 remotes.

  • Press the unlock button on each remote control you want to add, the blinkers will light up to confirm the adaptation process of each remote.

[Done, Go Back]
[Close Controller, Go Back - 06]


Special Procedures

Remote Control Synchronisation

  • If locked, open the car using the drivers door lock.
  • Press the remote control unlock button.
  • Put the key in the ignition lock and switch on ignition.
  • Switch off ignition and pull the key out of the ignition lock.
  • Press the remote control lock or unlock button.

The synchronisation is now finished.