Difference between revisions of "17606"
From Ross-Tech Wiki
(Created page with '== 17606/P1198 - Oxygen (Lambda) Sensor Heater Circuit: B1 S2: Electrical Malfunction == ==== Possible Causes ==== * Failed O2 sensor heater circuit * Wiring Harness issue * F…') |
|||
| Line 12: | Line 12: | ||
* Inspect and test wiring harness as per wiring diagram | * Inspect and test wiring harness as per wiring diagram | ||
* Replace ECM if O2 sensor and wiring harness are to factory design | * Replace ECM if O2 sensor and wiring harness are to factory design | ||
| + | |||
| + | ==== Special Notes ==== | ||
| + | |||
| + | On V6 engines, B1S2 and B2S2 can share a common ground though the ECM, see wiring diagram | ||
Revision as of 13:35, 6 October 2010
17606/P1198 - Oxygen (Lambda) Sensor Heater Circuit: B1 S2: Electrical Malfunction
Possible Causes
- Failed O2 sensor heater circuit
- Wiring Harness issue
- Failing ECM
Possible Solutions
- Inspect and test O2 sensor heater circuit as per repair manual
- Inspect and test wiring harness as per wiring diagram
- Replace ECM if O2 sensor and wiring harness are to factory design
Special Notes
On V6 engines, B1S2 and B2S2 can share a common ground though the ECM, see wiring diagram