Difference between revisions of "01435"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
RtWiKiSyS0p (talk | contribs) |
||
| Line 33: | Line 33: | ||
** Perform Brake Pressure Sensor 1 (G201) Basic Setting | ** Perform Brake Pressure Sensor 1 (G201) Basic Setting | ||
** Replace Brake Electronics Control Module (J104) | ** Replace Brake Electronics Control Module (J104) | ||
| + | |||
| + | |||
| + | === 01435 - Brake Pressure Sensor 1 (G201): Implausible Signal === | ||
| + | |||
| + | ==== Possible Symptoms ==== | ||
| + | |||
| + | * Malfunction Indicator Light (MIL) active | ||
| + | |||
| + | ==== Possible Causes ==== | ||
| + | |||
| + | * Brake Pedal Switch (F) faulty/jammed | ||
| + | * Brake Pressure Sensor 1 (G201) faulty | ||
| + | |||
| + | ==== Possible Solutions ==== | ||
| + | |||
| + | * Check/Replace Brake Pedal Switch (F) | ||
| + | ** See Measuring Value Blocks (MVB) | ||
| + | * Check Brake Pressure Sensor 1 (G201) | ||
| + | ** See Measuring Value Blocks (MVB) | ||
| + | * Check/Replace Brake Electronics Control Module (J104) and/or ABS Hydraulic Unit (N55) | ||
| + | |||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 09:23, 10 December 2010
01435 - Brake Pressure Sensor 1 (G201)
01435 - Brake Pressure Sensor 1 (G201): No or Incorrect Basic Setting / Adaptation
Possible Symptoms
- Malfunction Indicator Light (MIL) active
Possible Causes
- Basic Setting not performed
Possible Solutions
- Perform Basic Setting
01435 - Brake Pressure Sensor 1 (G201): Electrical Fault in Circuit
Possible Causes
- Brake Pedal Switch (F) faulty/jammed
- Brake Pressure Sensor 1 (G201) faulty
Possible Solutions
- Check/Replace Brake Pedal Switch (F)
- See Measuring Blocks
- Check/Replace Brake Pressure Sensor 1 (G201)
- ABS Hydraulic Unit (N55) may need to replaced
- Perform Brake Pump Bleeding
- Perform Brake Pressure Sensor 1 (G201) Basic Setting
- Replace Brake Electronics Control Module (J104)
01435 - Brake Pressure Sensor 1 (G201): Implausible Signal
Possible Symptoms
- Malfunction Indicator Light (MIL) active
Possible Causes
- Brake Pedal Switch (F) faulty/jammed
- Brake Pressure Sensor 1 (G201) faulty
Possible Solutions
- Check/Replace Brake Pedal Switch (F)
- See Measuring Value Blocks (MVB)
- Check Brake Pressure Sensor 1 (G201)
- See Measuring Value Blocks (MVB)
- Check/Replace Brake Electronics Control Module (J104) and/or ABS Hydraulic Unit (N55)