Difference between revisions of "ESP System Function Test (Conti/Teves)"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
|||
| Line 19: | Line 19: | ||
* Start road test (Do this on an enclosed site or make sure to drive according to traffic regulations). | * Start road test (Do this on an enclosed site or make sure to drive according to traffic regulations). | ||
* Make a right turn, then a left turn (or vice versa). A rotation rate (turn rate) of ~10 °/s must be reached while driving these turns. | * Make a right turn, then a left turn (or vice versa). A rotation rate (turn rate) of ~10 °/s must be reached while driving these turns. | ||
| − | * The ABS Warning Light (K47) should now | + | * The ABS Warning Light (K47) should now turn OFF. |
* ''A common example for turns like this is driving turns with a radius of 10 to 12 meters (30 to 40 feet) with a speed of 15 to 30 kph (9 to 18 mph).'' | * ''A common example for turns like this is driving turns with a radius of 10 to 12 meters (30 to 40 feet) with a speed of 15 to 30 kph (9 to 18 mph).'' | ||
* ''The ABS, EDS, ASR and ESP functions may NOT get activated during these test.'' | * ''The ABS, EDS, ASR and ESP functions may NOT get activated during these test.'' | ||
| − | * ''Doing other maneuvers between the turns | + | * ''Doing other maneuvers between the turns should have no influence on the ESP System Function Test.'' |
==== Special Notes ==== | ==== Special Notes ==== | ||
* If you are having trouble getting the function test carried out [http://www.ross-tech.com/contact.html please contact us directly]. | * If you are having trouble getting the function test carried out [http://www.ross-tech.com/contact.html please contact us directly]. | ||
Revision as of 11:33, 29 December 2010
ESP System Function Test
Notes
- The ESP road test serves to check the plausibility of the signals from the lateral acceleration sender, rotation rate sender and pressure sender.
- It should always be carried out after removing or replacing any parts of the ESP system.
- It is not possible to cancel the ESP road test after it has been started. The complete test procedure must be performed.
Pre-Conditions
- ABS Warning Light (K47) ON and ASR Indicator Light (K155) OFF.
- Engine RUNNING.
- Vehicle standing.
Instructions
- Press brake pedal firmly until the ASR Indicator Light (K155) goes ON. A brake pressure of at least 35 bar needs to be reached for this.
- Start road test (Do this on an enclosed site or make sure to drive according to traffic regulations).
- Make a right turn, then a left turn (or vice versa). A rotation rate (turn rate) of ~10 °/s must be reached while driving these turns.
- The ABS Warning Light (K47) should now turn OFF.
- A common example for turns like this is driving turns with a radius of 10 to 12 meters (30 to 40 feet) with a speed of 15 to 30 kph (9 to 18 mph).
- The ABS, EDS, ASR and ESP functions may NOT get activated during these test.
- Doing other maneuvers between the turns should have no influence on the ESP System Function Test.
Special Notes
- If you are having trouble getting the function test carried out please contact us directly.