Difference between revisions of "Cruise Control Retrofitting (8E)"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
RtWiKiSyS0p (talk | contribs) m |
||
| Line 35: | Line 35: | ||
The following Activations are necessary to ensure that the newly fitted parts are properly recognized and are ready to use. | The following Activations are necessary to ensure that the newly fitted parts are properly recognized and are ready to use. | ||
| − | * Update the [[Audi A4 (8E) Steering Wheel#Coding|Steering Column Control Module (J527 / #16) Coding]]. | + | * '''Update the [[Audi A4 (8E) Steering Wheel#Coding|Steering Column Control Module (J527 / #16) Coding]].''' |
| − | * Update the Engine Control Module (J623 / #01) Coding OR via Login/Coding-2 | + | * '''Update the Engine Control Module (J623 / #01) Coding OR via Login/Coding-2''' |
** Make sure that the '''Engine is NOT running''', otherwise the new Coding will be rejected. Models equipped with Start/Stop System do have a Shutoff Switch/Button which will deactivate the Start/Stop Function. | ** Make sure that the '''Engine is NOT running''', otherwise the new Coding will be rejected. Models equipped with Start/Stop System do have a Shutoff Switch/Button which will deactivate the Start/Stop Function. | ||
** For Engines with a 2nd Engine Control Module (J624 / #11) this needs to be coded as well. | ** For Engines with a 2nd Engine Control Module (J624 / #11) this needs to be coded as well. | ||
Revision as of 13:47, 16 March 2011
Requirements
Steering Column Control Module
There are 3 types of steering column control modules, only 2 of them support cruise control.
- Lowline
- Supported Steering Wheels: Standard Steering Wheel (4-Spoke)
- Supported Features: Trip Computer (does NOT support Cruise Control!)
- Part Numbers: 8E0-953-549-F 8E0-953-549-S
- Midline
- Supported Steering Wheels: Standard Steering Wheel (4-Spoke), Sport Steering Wheel (3-Spoke), Multi-Function Steering Wheel
- Supported Features: Trip Computer, Cruise Control
- Part Numbers: 8E0-953-549-L, 8E0-953-549-N
- Highline
- Supported Steering Wheels: Standard Steering Wheel (4-Spoke), Sport Steering Wheel (3-Spoke), Multi-Function Steering Wheel
- Supported Features: Trip Computer, Cruise Control, Steering Wheel Heating
- Part Numbers: 8E0-953-549-M, 8E0-953-549-P, 8E0-953-549-Q, 8E0-953-549-R
Note: When replacing the steering column control module you may need to learn the vehicle identification number (VIN).
Installation & Wiring
In general the whole retrofit is just plug and play except that one wire needs to be added.
- Wire T16a/5 from steering column control module to engine control module (see wiring diagram specific your particular car/engine).
- Install cruise control capable lever (see parts catalog/repair manual).
Configuration
The following Activations are necessary to ensure that the newly fitted parts are properly recognized and are ready to use.
- Update the Steering Column Control Module (J527 / #16) Coding.
- Update the Engine Control Module (J623 / #01) Coding OR via Login/Coding-2
- Make sure that the Engine is NOT running, otherwise the new Coding will be rejected. Models equipped with Start/Stop System do have a Shutoff Switch/Button which will deactivate the Start/Stop Function.
- For Engines with a 2nd Engine Control Module (J624 / #11) this needs to be coded as well.
- As a Rule of Thumb, Control Modules using Long Coding will by activated using Coding while those with Short Coding normally use Login/Coding-2 instead. Due to different Control Modules and Equipment in the Car the actual Coding/Login Table may not be shown here but will automatically be used by the Coding Assistant once you access the Function using VCDS.
If you are having trouble finding/calculating the proper Coding using the Long Coding Assist please Contact us directly. Make sure to include a complete Diagnostic Protocol (Auto-Scan) from the Car and state which steps/work you have performed yet.