Difference between revisions of "01487"

From Ross-Tech Wiki
m
Line 14: Line 14:
 
==== Possible Solutions ====
 
==== Possible Solutions ====
  
* Perform Brake Electronics Function Test (again)
+
* When found in Brake Electronics Control Module (J104)
 +
**  Perform [[ESP System Function Test|Brake Electronics Function Test]]
  
 
==== Special Notes ====
 
==== Special Notes ====
  
* The Brake Electronics Function Test on most ABS/ESP Systems should not exceed more than 50 Seconds
+
* When found in Brake Electronics Control Module (J104)
 +
** The Function Test on most ABS/ESP Systems should not exceed more than 50 Seconds
  
  

Revision as of 16:23, 13 July 2011

01487 - System Function Test

01487 - System Function Test

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON

Possible Causes

  • When found in Brake Electronics Control Module (J104)
    • Brake Electronics Function Test Timed Out

Possible Solutions

Special Notes

  • When found in Brake Electronics Control Module (J104)
    • The Function Test on most ABS/ESP Systems should not exceed more than 50 Seconds


01487 - System Function Test: Implausible Signal

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON

Possible Causes

  • When found in Control Module for Level Control (J197)
    • Internal Error in Control Module for Level Control (J197)
    • Control Module for Level Control (J197) faulty

Special Notes

  • When found in Audi A8 (4E): Level Control (J197), this Fault Code can have several different Causes but by clearing Fault Codes most of those will be reset. Switch OFF the Ignition for 5 Seconds and then switch it back ON again, now clear Fault Codes and re-check for Fault Codes. If no Fault Code remains you are done. If the fault code remains, switch OFF the Ignition for 5 Seconds again and then switch it back ON. Now wait 5 Minutes before re-checking for Fault Codes! If after these 5 Minutes the Fault Code remains you may need to replace the Control Module for Level Control (J197).