Difference between revisions of "01128"
From Ross-Tech Wiki
(Created page with '== 01128 - Immobilizer Pickup Coil (D2) == ==== Possible Symptoms ==== * Immobilizer light flashing * Engine shuts off ==== Possible Causes ==== * Wiring harness issue * De…') |
RtWiKiSyS0p (talk | contribs) |
||
| Line 3: | Line 3: | ||
==== Possible Symptoms ==== | ==== Possible Symptoms ==== | ||
| − | * Immobilizer | + | * Immobilizer Warning Light flashing |
| − | * Engine shuts | + | * Immobilizer active (Engine shuts OFF after 2-3 Seconds) |
==== Possible Causes ==== | ==== Possible Causes ==== | ||
| − | * Wiring | + | * Wiring and/or Connector(s) from/to Immobilizer Pickup Coil (D2) faulty |
| − | * | + | * Immobilizer Pickup Coil (D2) faulty |
| − | * | + | * Immobilzier Control Module faulty |
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
| − | * | + | * Check Wiring and/or Connector(s) from/to Immobilizer Pickup Coil (D2) |
| − | * | + | * Check/Replace Immobilizer Pickup Coil (D2) |
| − | ** Immobilizer 2 and 3 | + | ** Check Measuring Value Blocks (MVB) |
| + | ** Immobilizer 2 and 3 Systems should read ~23.5 ohms on the Pickup Coil | ||
__FORCETOC__ | __FORCETOC__ | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 09:49, 15 February 2012
01128 - Immobilizer Pickup Coil (D2)
Possible Symptoms
- Immobilizer Warning Light flashing
- Immobilizer active (Engine shuts OFF after 2-3 Seconds)
Possible Causes
- Wiring and/or Connector(s) from/to Immobilizer Pickup Coil (D2) faulty
- Immobilizer Pickup Coil (D2) faulty
- Immobilzier Control Module faulty
Possible Solutions
- Check Wiring and/or Connector(s) from/to Immobilizer Pickup Coil (D2)
- Check/Replace Immobilizer Pickup Coil (D2)
- Check Measuring Value Blocks (MVB)
- Immobilizer 2 and 3 Systems should read ~23.5 ohms on the Pickup Coil