User:Peter: Difference between revisions
Table Of Contents
No edit summary |
No edit summary |
||
| Line 10: | Line 10: | ||
Group-055 Field-1 = G289( _Sensor)Min value'''<br> | Group-055 Field-1 = G289( _Sensor)Min value'''<br> | ||
Group-055 Field-2 = G289( _Sensor)Max value'''<br> | Group-055 Field-2 = G289( _Sensor)Max value'''<br> | ||
<br> | |||
Look at: | Look at:'''<br> | ||
Group-003 Field-1,2,3 | Group-003 Field-1,2,3 | ||
- If the values are with in the range of the Min - Max | - If the values are with in the range of the Min - Max'''<br> | ||
Basic settings can be performed, if not inspect suspension. | Basic settings can be performed, if not inspect suspension.'''<br> | ||
<br> | |||
[Security Access - 16] | '''[Security Access - 16]'''<br> | ||
Enter 31564, to enable the basic setting. | Enter 31564, to enable the basic setting.'''<br> | ||
[Do it!] | '''[Do it!]'''<br> | ||
[Basic Settings - 04] | '''[Basic Settings - 04]'''<br> | ||
Group 001 | Group 001 | ||
[Go!] | '''[Go!]'''<br> | ||
The New values should be displayed. | <br> | ||
- To check the learned values, check Measuring Value Group-008. | The New values should be displayed.'''<br> | ||
[Meas. Blocks - 08] | - To check the learned values, check Measuring Value Group-008.'''<br> | ||
Enter [008] - Go! | [Meas. Blocks - 08]'''<br> | ||
The values displayed should be the learned values as displayed in the | Enter [008] - Go!'''<br> | ||
Basic Settings window. | The values displayed should be the learned values as displayed in the Basic Settings window.'''<br> | ||
Revision as of 14:56, 3 May 2013
Electronic Damping Control J250 - Basic Settings
[Select]
[14 - Susp. Elect]
[Meas. Blocks - 08]
Note the values stores in:
Group-054 Field-1 = G78( _Sensor)Min value
Group-054 Field-2 = G78( _Sensor)Max value
Group-055 Field-1 = G289( _Sensor)Min value
Group-055 Field-2 = G289( _Sensor)Max value
Look at:
Group-003 Field-1,2,3
- If the values are with in the range of the Min - Max
Basic settings can be performed, if not inspect suspension.
[Security Access - 16]
Enter 31564, to enable the basic setting.
[Do it!]
[Basic Settings - 04]
Group 001
[Go!]
The New values should be displayed.
- To check the learned values, check Measuring Value Group-008.
[Meas. Blocks - 08]
Enter [008] - Go!
The values displayed should be the learned values as displayed in the Basic Settings window.
No categories.