Difference between revisions of "P189C/006300"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
|||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
| − | + | == P189C/006300 - Function Restriction due to Insufficient Pressure Build-Up == | |
| − | |||
| − | |||
| − | |||
==== Possible Symptoms ==== | ==== Possible Symptoms ==== | ||
| Line 24: | Line 21: | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
| − | * On the | + | * On the 7-Speed Dual Clutch Transmission (DSG/0AM) transmission check for battery power at Pin 9 of the 25-Pin connector. |
* Once an effective repair has been completed, clear faults from Transmission Control Module and set Basic Settings. | * Once an effective repair has been completed, clear faults from Transmission Control Module and set Basic Settings. | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 08:29, 2 December 2013
P189C/006300 - Function Restriction due to Insufficient Pressure Build-Up
Possible Symptoms
- Unable to complete Basic Settings, fault will not clear from Transmission Control Module.
Possible Causes
- Faulty wiring.
- Faulty connections.
- Faulty Fuse(s).
- Faulty Mechatronic Unit, (V401-Hydraulic pump motor)
Possible Solutions
- Check/repair/replace faulty wiring/connections.
- Check/replace faulty fuse(s).
- Replace faulty Mechatronic Unit.
Special Notes
- On the 7-Speed Dual Clutch Transmission (DSG/0AM) transmission check for battery power at Pin 9 of the 25-Pin connector.
- Once an effective repair has been completed, clear faults from Transmission Control Module and set Basic Settings.