User:Jef

Prerequisites:

• Doors, hood and rear lid closed
• Engine at idle, parking brake set
• Parked on level surface
• Metric tape measure

Measuring the ride height is done from the center of the wheel, vertically, to the edge of the fender to the closest millimeter.

[Select]
[34 - Level Control]
[Security Access - 16]
Enter 31564
[Do It!]

• If the Security Access code does not work, try 31564 in [Login - 11] or [Coding II - 11]

[Adaption - 10]

Channel 01 (front left)
[Read]

• A message of "Wait" will be displayed while the right height is adjusted.
• When message changes to "Value", take the measurement at front left.
• Input the New value in millimeters.

[Test]
[Save]
[Yes]

Channel 02 (front right)
[Read]

• Take measurement at right front.
• Input the New value in millimeters.

[Test]
[Save]
[Yes]

Channel 03 (rear left)
[Read]

• Take measurement at left rear.
• Input the New value in millimeters.

[Test]
[Save]
[Yes]

Channel 04 (rear right)
[Read]

• Take measurement at right rear.
• Input the New value in millimeters.

[Test]
[Save]
[Yes]

Channel 05
[Read]
New value 1
[Test]
[Save]
[Yes]
[Done, Go Back]

Special Notes

• These instructions should work with most non-USD Level Control systems found in:
  • A6
  • A8
  • Q7
  • Phaeton
  • Touareg
  • Bentley Continental.

• Additional links on this topic
  • http://www.ross-tech.com/vag-com/cars/levelcontrol.html
  • http://forums.vwvortex.com/showthread.php?2055204

Video Link

Suspension Leveling Calibration

http://www.youtube.com/watch?v=o2aeQ6bhu-Y