Difference between revisions of "01316"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
|||
| Line 14: | Line 14: | ||
* Check Measuring Value Blocks (MVB) | * Check Measuring Value Blocks (MVB) | ||
** Usually Measuring Value Blocks (MVB) 125+ show the current Communication Status | ** Usually Measuring Value Blocks (MVB) 125+ show the current Communication Status | ||
| + | |||
| + | |||
| + | === 01316 - ABS Control Module: Check DTC Memory === | ||
| + | |||
| + | ==== Possible Causes ==== | ||
| + | |||
| + | * Fault(s) stored in ABS Control Module | ||
| + | |||
| + | ==== Possible Solutions ==== | ||
| + | |||
| + | * Correct/Erase fault codes in the ABS Control Module | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 11:17, 18 August 2020
01316 - ABS Control Module
01316 - ABS Control Module: No Signal/Communication
Possible Causes
- Wiring/Connector(s) from/to ABS Control Module faulty
- Fault(s) stored in ABS Control Module
Possible Solutions
- Check Wiring/Connector(s) from/to ABS Control Module
- Check Measuring Value Blocks (MVB)
- Usually Measuring Value Blocks (MVB) 125+ show the current Communication Status
01316 - ABS Control Module: Check DTC Memory
Possible Causes
- Fault(s) stored in ABS Control Module
Possible Solutions
- Correct/Erase fault codes in the ABS Control Module