Bentley Continental (3W) Brake Electronics (Bosch 8.1): Difference between revisions
From Ross-Tech Wiki
Table Of Contents
No edit summary |
|||
| Line 10: | Line 10: | ||
Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.<br> | Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.<br> | ||
Verify the steering wheel is centered by moving the vehicle moving straight ahead (less than 20KMH/15MPH).<br> | |||
'''[Meas. Blocks - 08]'''<br> | '''[Meas. Blocks - 08]'''<br> | ||
Revision as of 14:53, 20 July 2022
Coding
Registered users can email us directly with a complete Auto-Scan for assistance coding this module.
Basic Setting
Steering Angle Sensor (G85) Calibration
Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.
Verify the steering wheel is centered by moving the vehicle moving straight ahead (less than 20KMH/15MPH).
[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]
[Security Access - 16]
Enter 40168
[Do It!]
[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]
[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]
[Close Controller, Go Back - 06]
No categories.