C1048/020552: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
C1048/020552 - Sensor for Ride-Height
-
1.1.1
C1048/020552 - Sensor for Ride-Height: Mechanical Failure
- 1.1.1.2 Possible Symptoms
- 1.1.2.2 Possible Causes
- 1.1.3.2 Possible Solutions
- 1.1.4.2 Special Notes
-
1.1.1
C1048/020552 - Sensor for Ride-Height: Mechanical Failure
Created page with "__FORCETOC__ == C1048/020552 - Sensor for Ride-Height == === C1048/020552 - Sensor for Ride-Height === ==== Possible Symptoms ==== * Lever Control is de-activated * Vehicle..." |
No edit summary |
||
| Line 2: | Line 2: | ||
== C1048/020552 - Sensor for Ride-Height == | == C1048/020552 - Sensor for Ride-Height == | ||
=== C1048/020552 - Sensor for Ride-Height === | === C1048/020552 - Sensor for Ride-Height: Mechanical Failure === | ||
==== Possible Symptoms ==== | ==== Possible Symptoms ==== | ||
| Line 19: | Line 19: | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
* Check sensor (use Advanced Measuring values: IDE02951, IDE02952, IDE02953, IDE02954) | * Check sensor(s) (use Advanced Measuring values: IDE02951, IDE02952, IDE02953, IDE02954) | ||
* Check sensor's mounting, lever, etc.. and correct as needed | * Check sensor's mounting, lever, etc.. and correct as needed | ||
* Check the vehicle's body, suspension, etc.. and correct as needed | * Check the vehicle's body, suspension, etc.. and correct as needed | ||
Latest revision as of 15:36, 12 June 2024
C1048/020552 - Sensor for Ride-Height
C1048/020552 - Sensor for Ride-Height: Mechanical Failure
Possible Symptoms
- Lever Control is de-activated
- Vehicle is not level
Possible Causes
- Level control sensor
- Damaged sensor, linkage or mounting
- Sensor lever is reversed, must point towards the connector
- Damaged to the body, suspension
- Flat tire
Possible Solutions
- Check sensor(s) (use Advanced Measuring values: IDE02951, IDE02952, IDE02953, IDE02954)
- Check sensor's mounting, lever, etc.. and correct as needed
- Check the vehicle's body, suspension, etc.. and correct as needed
Special Notes
- The fault code C1048 sets when the vehicle's level sensor(s) displays a discrepancy lasting longer than 50 seconds, with a height variation exceeding 15 mm.
No categories.