Difference between revisions of "User:Jef"
From Ross-Tech Wiki
| Line 30: | Line 30: | ||
*If '''LUFE-DAEMPFER''' is not shown in the Component field, this information may not apply. | *If '''LUFE-DAEMPFER''' is not shown in the Component field, this information may not apply. | ||
---- | ---- | ||
| + | <br> | ||
===Re-adapt Adaptive Suspension to default position=== | ===Re-adapt Adaptive Suspension to default position=== | ||
'''Special Notes, warnings, etc''' | '''Special Notes, warnings, etc''' | ||
| − | * Do not at any point in time select Basic Settings [ | + | * '''Do not''' at any point in time select Basic Settings '''[IDE01475] Resetting of all adaptations'''. If you choose to do so, [http://wiki.ross-tech.com/wiki/index.php/B2013 DTC B2013: No End-of-Line Programming] will be stored and you will need to make an appointment with your local dealer! |
* Make sure you perform and save an [Auto-Scan] before beginning any work. | * Make sure you perform and save an [Auto-Scan] before beginning any work. | ||
* If there is an 'incorrectly coded' fault in the [34-Level Control], the controller will need to be coded first. | * If there is an 'incorrectly coded' fault in the [34-Level Control], the controller will need to be coded first. | ||
Revision as of 10:16, 17 July 2024
As per Peter's suggestion, bundling Level Control information into wiki pages... looking to break this down into non UDS and UDS.
Page titles:
Level Control, UDS
Level Control, non-UDS
Looking at component info to help people ID or verify what version they have.
non-UDS (legacy):
Component: LUFTFDR.-CDC
Component: J197 LUFTFEDER
Component: - 2C1A1
UDS:
Component: LUFE-DAEMPFER
page title: Level Control, UDS
This information applies to Level Control, UDS versions. This can be identified by evaluating the data in the Auto-Scan:
Address 34: Level Control (J197) Labels:. 4G0-907-553.clb Part No SW: 4G0 907 553 G HW: 4G0 907 553 F Component: LUFE-DAEMPFER H19 0783
- If LUFE-DAEMPFER is not shown in the Component field, this information may not apply.
Re-adapt Adaptive Suspension to default position
Special Notes, warnings, etc
- Do not at any point in time select Basic Settings [IDE01475] Resetting of all adaptations. If you choose to do so, DTC B2013: No End-of-Line Programming will be stored and you will need to make an appointment with your local dealer!
- Make sure you perform and save an [Auto-Scan] before beginning any work.
- If there is an 'incorrectly coded' fault in the [34-Level Control], the controller will need to be coded first.
- If you are attempting to alter the ride height use this procedure at your own risk!
Prerequisites
- Ignition [ON], Use a Battery maintainer
- Vehicle on level surface
- No persons or gear in Vehicle
- Fuel Tank 60% or more
- Nothing under vehicle
- Door are to remain shut during the entire procedure
- No faults in the [34-Level Control] controller other than "No or incorrect Basic Settings"
[34-Level Control]
[Security Access-16]
- Enter 201013
[Basic Settings - 04]