Difference between revisions of "User:Jef"

From Ross-Tech Wiki
Line 1: Line 1:
== P026A/000618 - Charge Air Cooler: Efficiency Below Threshold - MIL ON ==
+
== Contacting Ross-Tech ==
  
==== Possible Symptoms ====
+
Blah blah blah, if additional assistance is needed, our registered customers can submit an auto-scan for review blah blah blah
  
* Malfunction Indicator Lamp (MIL) active
+
Once the Auto-Scan is complete, click on the small VCDS icon in the top left corner, then select '''[Copy and Submit Auto-Scan]'''.
* Reduced engine output
 
  
==== Possible Causes ====
+
https://i.imgur.com/XbVYS1j.jpg
  
* Intercooler restricted (internal or external)
 
* Faulty sensor
 
* ECM firmware issue
 
  
==== Special Notes ====
+
This will load up a special web page with a form to fill out.  Please verify you type in your correct email address.
  
* On some TDI CR engines, a faulty G42 / G31 sensor at the top of the intercooler may report a much higher than possible temperature:
+
The Short Serial Number is on your Ross-Tech device, you will find that on the sticker.  It might be something like:
** IDE04938 - Sensor for temp after charge air cooler: raw value
+
* HN2-xxxxxx
** [https://forums.ross-tech.com/index.php?threads/32948/ Case Study - P026A/000618 - Charge Air Cooler: Efficiency Below Threshold - MIL ON]
+
* H17-xxxxxx
 +
* HCxxxxxx
 +
* UCxxxxxx
  
* When found in a Touareg with the 3.0L TDI CNRB engine, there may be a firmware update for this:
+
In the Comments box, document the issue or concern.  Once you have that typed out, in the Comment box, right click your mouse and then select '''[Paste]'''. You will see the data from the Auto-Scan populate the Comments field.  
** https://static.nhtsa.gov/odi/tsbs/2013/SB-10067148-5290.pdf
 
  
[[Category:Fault Codes]]
+
https://i.imgur.com/tisRfYY.jpeg
 +
 
 +
Click the '''[Send Email]''' that is below the Comments box once the form is filled out.
 +
 
 +
The Ross-Tech support team will reply back once we have an answer to provide.  We have a Ross-Tech Forum where you should post your scan and questions:
 +
 
 +
'''https://forums.ross-tech.com/index.php'''
 +
 
 +
That is the best place to get help from the greatest variety of different people, in a place where answers will be searchable in the future as well.

Revision as of 14:30, 27 March 2025

Contacting Ross-Tech

Blah blah blah, if additional assistance is needed, our registered customers can submit an auto-scan for review blah blah blah

Once the Auto-Scan is complete, click on the small VCDS icon in the top left corner, then select [Copy and Submit Auto-Scan].

XbVYS1j.jpg


This will load up a special web page with a form to fill out. Please verify you type in your correct email address.

The Short Serial Number is on your Ross-Tech device, you will find that on the sticker. It might be something like:

  • HN2-xxxxxx
  • H17-xxxxxx
  • HCxxxxxx
  • UCxxxxxx

In the Comments box, document the issue or concern. Once you have that typed out, in the Comment box, right click your mouse and then select [Paste]. You will see the data from the Auto-Scan populate the Comments field.

tisRfYY.jpeg

Click the [Send Email] that is below the Comments box once the form is filled out.

The Ross-Tech support team will reply back once we have an answer to provide. We have a Ross-Tech Forum where you should post your scan and questions:

https://forums.ross-tech.com/index.php

That is the best place to get help from the greatest variety of different people, in a place where answers will be searchable in the future as well.