Audi A6 (4B) Brake Electronics (Bosch 5.7)

Login

Note #1: After Login has been carried out you need to recode the control module.
Note #2: Special Login 07499 is used for 6-Cylinder Diesel Engine with 1LG Brakes and Multitronic.

• 0?xxx: Chassis
  • 6 = Audi A6 Light Armored
  • 7 = Audi A6
• 0x?xx: Brakes
  • 1 = 2FNR 42 AL 18" (PR-1LJ/1LP)
  • 2 = 2FNR 42 AL 17" (PR-1LL)
  • 3 = FN3 16" (PR-1LF/1LT)
  • 4 = HP2 16" (PR-1LX)
  • 4 = FNR 16" (PR-1LA/1LG)
  • 5 = FN3 15" (PR-1LB/1LE)
  • 6 = C54 (PR-1LZ)
• 0xx?x: Engine
  • 5 = 4/6 Cyl. Diesel
  • 7 = 4/5 Cyl. Gasoline
  • 9 = 6/8 Cyl. Gasoline
• 0xxx?: Transmission
  • 5 = Manual
  • 7 = Automatic
  • 9 = Multitronic

Coding

Note #1: Coding is accepted after a specific login has been carried out.
Note #2: After successful coding the steering angle sensor basic setting needs to be carried out.
Note #3: Special Coding 06399 is used for 6-Cylinder Diesel Engine with 1LG Brakes and Multitronic.

• 0?xxx: Chassis
  • 6 = Audi A6
  • 7 = Audi A6 Light Armored
• 0x?xx: Brakes
  • 1 = C54 (PR-1LZ)
  • 2 = FN3 15" (PR-1LB/1LE)
  • 3 = HP2 16" (PR-1LX)
  • 3 = FNR 16" (PR-1LA/1LG)
  • 4 = FN3 16" (PR-1LF/1LT)
  • 5 = 2FNR 42 AL 17" (PR-1LL)
  • 6 = 2FNR 42 AL 18" (PR-1LJ/1LP)
• 0xx?x: Engine
  • 5 = 4/6 Cyl. Diesel
  • 7 = 4/5 Cyl. Gasoline
  • 9 = 6/8 Cyl. Gasoline
• 0xxx?: Transmission
  • 5 = Manual
  • 7 = Automatic
  • 9 = Multitronic

Basic Setting

Steering Angle Sensor (G85) Calibration

[Select]
[03 - ABS Brakes]

[Fault Codes - 02]
[Done, Go Back]

Turn steering wheel at least 30 ° left and back straight ahead.

[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]

[Login - 11]
Enter 40168
[Do It!]

[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]

[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]

[Close Controller, Go Back - 06]